Fortinet 800 To set the date and time, Go to System Config Time, To register the FortiGate unit

Page 39

NAT/Route mode installation

Starting the setup wizard

 

 

In standalone mode, the modem interface is the connection from the FortiGate unit to the Internet.

When connecting to the ISP, in either configuration, the FortiGate unit modem can automatically dial up to three dialup accounts until the modem connects to an ISP.

The modem interface connected to the FortiGate USB interface. You must connect an external modem to the USB interface.

Next steps

You can use the following information to configure FortiGate system time, to register the FortiGate unit, and to configure antivirus and attack definition updates.

Refer to the FortiGate Administration Guide for complete information on configuring, monitoring, and maintaining the FortiGate unit.

To set the date and time

For effective scheduling and logging, the FortiGate system date and time must be accurate. You can either manually set the system date and time or configure the FortiGate unit to automatically keep its time correct by synchronizing with a Network Time Protocol (NTP) server.

1Go to System > Config > Time.

2Select Refresh to display the current FortiGate system date and time.

3Select a Time Zone from the list.

4Optionally, select Automatically adjust clock for daylight saving changes check box.

5Select Set Time and set the FortiGate system date and time.

6Set the hour, minute, second, month, day, and year as required.

7Select Apply.

To use NTP to set the FortiGate date and time

1Go to System > Config > Time.

2Select Synchronize with NTP Server to configure the FortiGate unit to use NTP to automatically set the system time and date.

3Enter the IP address or domain name of the NTP server that the FortiGate unit can use to set its time and date.

4Specify how often the FortiGate unit should synchronize its time with the NTP server.

5Select Apply.

To register the FortiGate unit

After purchasing and installing a new FortiGate unit, you can register the unit by going to the System Update Support page, or using a web browser to connect to http://support.fortinet.com and selecting Product Registration.

FortiGate-800/800F Installation Guide

01-28006-0024-20041026

39

Image 39
Contents October 01-28006-0024-20041026 Installation GuideRegulatory Compliance TrademarksTable of Contents Index Introduction Secure installation, configuration, and managementWeb-based manager Command line interfaceDocument conventions Setup wizardFortiGate documentation FortiGate Installation GuideFortiMail documentation Related documentationFortiManager documentation FortiClient documentationComments on Fortinet technical documentation FortiLog documentationCustomer service and technical support Comments on Fortinet technical documentation Getting started Package contents Mounting Turning the FortiGate unit power on and off Connecting to the web-based managerTo power off the FortiGate unit To connect to the web-based manager Connecting to the command line interface CLIWelcome To connect to the CLIFactory default NAT/Route mode network configuration Factory default FortiGate configuration settingsNetwork Settings Factory default Transparent mode network configurationFactory default protection profiles Factory default firewall configurationWeb protection profile settings NAT/Route mode Planning the FortiGate configurationTransparent mode NAT/Route mode with multiple external network connectionsConfiguration options Web-based manager and setup wizardFront control buttons and LCD Next steps Preparing to configure the FortiGate unit in NAT/Route mode NAT/Route mode installationDMZ Dhcp or PPPoE configurationUsing the web-based manager Configuring basic settingsTo configure interfaces Go to System Network Interface Go to System Router Static Using the front control buttons and LCDTo configure DNS server settings Go to System Network DNS To add a default routeTo add/change the administrator password Using the command line interfaceConfiguring the FortiGate unit to operate in NAT/Route mode To add a default gateway to an interfaceExample To configure interfacesGet system interface To configure DNS server settingsOn page 28 and on page 29 for other settings Using the setup wizardDhcp server Starting the setup wizardConnecting the FortiGate unit to the networks FortiGate-800FortiGate-800F To connect to FortiGate-800/800F user-defined interfaces To connect the FortiGate unit running in NAT/Route modeConfiguring the networks Go to System Config Time To set the date and timeTo register the FortiGate unit Go to System Maintenance Update Center To configure virus, attack, and spam definition updatesPreparing to configure Transparent mode Transparent mode installationTo change the Management IP Go to System Network Management To change the management IP address and netmask Reconnecting to the web-based managerTo add a default gateway To change to Transparent mode using the CLITo configure the management IP address End To configure the default gatewayTo start the setup wizard Connecting the FortiGate unit to your networkFortiGate-800F Internal Network Other Network To register your FortiGate unit Reconnecting to the web-based manager Priorities of heartbeat device and monitor priorities High availability installationConfiguring FortiGate units for HA operation High availability configuration settingsGroup ID MAC Address To change the FortiGate unit host name High availability settings ScheduleConfig system global Set hostname namestr end Configuring FortiGate units for HA using the CLITo configure the FortiGate unit for HA operation Connecting the cluster to your networksTo connect the cluster Internal Network Installing and configuring the clusterConfiguring FortiGate units for HA using the CLI CLI IndexIndex 01-28006-0024-20041026

800F, 800 specifications

Fortinet, a leader in cybersecurity solutions, has made significant strides in fortifying enterprise networks with its FortiGate 800 and 800F series. These next-generation firewalls are designed to deliver high performance and security for organizations seeking to protect their critical assets while ensuring optimal network efficiency.

The FortiGate 800 and 800F series are built on Fortinet's proprietary Security Fabric architecture, which provides a consolidated approach to security. This architecture allows organizations to leverage seamless integration across various security solutions and services, enhancing visibility and control. With a focus on scalability, these models support various deployment scenarios—from branch offices to data centers—making them versatile options for organizations of any size.

One of the standout features of the FortiGate 800 and 800F series is their robust threat intelligence capabilities. Powered by FortiGuard Labs, these firewalls provide real-time threat intelligence that enables proactive threat mitigation and incident response. This not only helps to defend against known threats but also enhances the firewall’s ability to identify emerging threats, ensuring comprehensive protection.

The series boasts impressive performance metrics. The FortiGate 800F can process up to 20 Gbps of firewall throughput and 1.5 million concurrent sessions, making it a suitable choice for high-performance environments. Additionally, the built-in SSL inspection capabilities allow organizations to decrypt and inspect encrypted traffic, which is crucial for detecting hidden threats.

The FortiGate 800 and 800F also feature advanced security technologies, including Intrusion Prevention System (IPS), antivirus, web filtering, and application control, all managed through a unified interface. This centralization simplifies management and reduces administrative overhead, allowing IT teams to focus on strategic initiatives.

Another significant characteristic of the FortiGate 800F is its energy efficiency. The design includes hardware optimizations that not only enhance performance but also reduce power consumption, aligning with the growing emphasis on sustainability practices.

In summary, the Fortinet FortiGate 800 and 800F series are comprehensive network security solutions that leverage advanced technologies to provide organizations with the security, performance, and flexibility necessary in today's threat landscape. With their robust threat intelligence and high throughput capabilities, these firewalls are well-suited for enterprises looking to fortify their defenses against an ever-evolving array of cyber threats.