Furuno CSH-5L/CSH-8L manual How to adjust TX output

Page 32

2. FINE TUNING THE SONAR PICTURE

2.4Suppressing Bottom and Sea Surface Reflections in Shallow Fishing Grounds

In shallow fishing grounds with hard or rocky bottom, bottom reflections often interfere with wanted fish echoes and they can not be eliminated sufficiently with the aforementioned TVG and AGC, especially when the tilt angle is large in order to track fish schools approaching within 400 m. In such cases try to reduce the output power without turning down the gain. The picture becomes clearer when the output power is reduced rather than when the gain is decreased as illustrated below.

1.Press the MENU key. The last-used menu appears.

2.Use the [RANGE] control to choose [MENU MODE] at the top of the screen.

3.Use the [GAIN] control to choose SONAR to display the SONAR menu.

4.Use the [RANGE] control to choose TX OUTPUT.

5.Use the [GAIN] control to set TX output. The higher the setting (setting range: 0-10) the greater the TX power.

6.Press the [MENU] key to close the menu.

For long-range detection, set TX OUTPUT to 10.

 

 

Bottom echo masks

 

 

fish echo.

Improper

 

TVG and AGC

 

 

 

adjusted, OUTPUT

 

 

high.

Proper

 

OUTPUT decreased,

 

gain maintainted

 

 

 

 

Fish echo weakened

Fish echo

How to adjust TX output

2-4

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Color Scanning Sonar 00080940402 Safety Instructions Turn off the hull unit before using the hand crank Table of Contents Marks and Data Index Word to the Owner of the CSH-5L/CSH-8L FeaturesForeword Vii System ConfigurationSystem configuration of CSH-5L System configuration of CSH-8L ViiiControl unit Operational OverviewControl Unit Remote Controller option Remote controllerLowering the transducer Basic Operating ProcedureTurning on the power Transmitting Sonar menuAdjusting backlighting of control unit System menuChoosing a display mode Mode description Description DisplayNorm COMBI-1Normal mode display sonar display Sonar displayCOMBI-1 display sonar display + audio display COMBI-1 display sonar display + audio displayChoosing the display range COMBI-2 display sonar display + echosounder displayCOMBI-2 display sonar display + echosounder display Detection rangeExamples of proper and improper gain Adjusting the gainRetracting the transducer, turning off the power Tilt range Setting the Tilt AngleAutomatic tilt on/off Auto tilt concept Range and tilt angleRange m ±2-10 ±4-14 ±6-20 ±10-26 How to discriminate fish echoes from the bottom Bottom and tilt angleCase 1 Tilt angle 30 to 40 degrees Case 2 Tilt angle 10 to 20 degreesTilt angle and surface fish example CSH-5L Points to considerTilt angle for surface fish Finding Range and Bearing to a Target Suitable tilt angleDepth, detection range and tilt angle Location of trackball dataOperating procedure Sonar Menu OverviewDescription Ref. Sonar menu descriptionDescription of sonar menu Description of sonar menu con’t from previous This page intentionally left blank How TVG works Fine Tuning the Sonar PictureEliminating Unwanted Echoes 1 AGC Displaying Surface Fish ClearlySuppressing Bottom Tail Pulse length 3 2ND AGCHow to adjust TX output Rejecting Sonar Interference and Noise Identifying noise sourceRejecting noise with the interference rejector Rejecting noise with the noise limiterRejecting interference with TX cycle Interference ringsChoosing Beamwidth Deleting Weak EchoesEcho Averaging Horizontal beamwidthThis page intentionally left blank Target lock mark and target lock data Advanced Sonar OperationTracking a Fish School target lock Target lock and tilt angle Detecting Fish Schools Aurally Fish alarm zones Fish AlarmFish alarm zone Fish mark and fish mark data Measuring Fish School SpeedEntering a fish mark Deleting individual fish marks How to use the off-center functionRelocating Fish School for Easy Observation How to use the event mark Event Mark, Own Ship Position MarkEvent mark Entering an event markEvent marks Entering an own ship position markDeleting an event mark Ship Collectively Deleting MarksTrack Function Keys F1-F4 Operating the function keysProgramming for fishing ground or target fish Erase Marks dialog boxProgramming specific function Useful programs main items onlyTX Output Pulse Length TX Cycle TVG Near TVG FAR HOR Beamwidth Color Curve ResponseConfirming function key program Function key assignment confirmation screenStabilizer mark Suppressing Effects of Pitching and Rolling StabilizerHow the stabilizer works Advanced Sonar Operation Display range and shift concept Echosounder ModeChoosing the Range Adjusting the Gain Sounder menuMeasuring depth Picture Advance SpeedMeasuring Depth Suppressing Interference Suppressing Low Level NoiseInterference ClutterErasing Weak Echoes Weak echoesOther Items on the Sounder Menu Sounder menu descriptionCurve DraftMarks and data on the normal display Marks and DataMarks and Data on the Normal Display Description of marks and data on the normal display Points to North Heading MarkMarks and Data Press the R/B key. Own ship position and trackball mark are Marks and Data on the Echosounder and Audio Displays Marks and data on the echosounder and audio displaysOn the System menu Bottom echoes Interpreting the DisplayBottom Echo Fish School Fish echoesSea Surface Reflections WakeSea surface reflections WakeFalse Echo by Sidelobe Noise and InterferenceSidelobe echo Noise and interferenceMarks menu Marks and System MenusMarks Menu Marks menu description System Menu System menu Description of System menuDimmer Disp SelectDescription of System menu con’t from previous Cleaning the Equipment MAINTENANCE, TroubleshootingGeneral Maintenance Lubrication points, zinc plate Hull Unit MaintenanceHull unit maintenance points Hand crank Manually raising the transducerHull unit Fuse Replacement Fan ReplacementUnit Fuse Type Code No Type Code NoTroubleshooting Symptom Check, RemedyError Messages Message Meaning, Remedy OvervoltageTransducer not retracted High speedDiagnostic Tests Choosing a diagnostic testContinuous test example CSH-5L, 55 kHz transducer Description of diagnostic testsSingle test, Continuous test Panel test Panel testColor test White RED Green BlueColor test Pattern testSIO test SIO testEcho tests Echo testsSpecifications of Color Scanning Sonar CSH-5L/8L Hull Unit Interface This page is intentionally left blank Menu Tree Sonar menuSounder menu AP-1AP-2 Marks menuSystem menu Index IN-1

CSH-5L/CSH-8L specifications

Furuno CSH-5L and CSH-8L are advanced marine radar systems known for their cutting-edge technology and user-friendly interfaces. Designed primarily for maritime applications, these radar units cater to a wide range of vessels, from commercial ships to fishing boats. The primary distinguishing feature of the CSH-5L and CSH-8L radar systems lies in their ability to provide high-resolution images and precise detection of targets, ensuring navigational safety and operational efficiency on the water.

One of the standout technologies incorporated into both models is the pulse compression technique. This feature significantly enhances target resolution and minimizes blind spots, allowing the radar to detect smaller objects at greater distances. With the CSH-5L and CSH-8L's powerful signal processing capabilities, users can expect exceptional performance even in challenging weather conditions, ensuring reliable operation during storms or fog.

The CSH-5L model operates at a frequency range of 5 GHz, while the CSH-8L uses an 8 GHz frequency. Both radars are equipped with a rotating antenna that provides a wide coverage range, allowing for efficient monitoring of the surrounding marine environment. Their high sensitivity and low noise levels enhance target detection, making them particularly useful for locating small fishing vessels or buoys.

Another important characteristic of the Furuno CSH-5L and CSH-8L is their user-friendly interfaces. Both models feature intuitive controls, allowing operators to adjust settings easily and access critical information quickly. The displays are designed for clarity, enabling users to distinguish between targets and navigate effectively.

Additionally, the radar systems include advanced features such as automatic target tracking and target acquisition capabilities. This functionality allows users to monitor multiple targets simultaneously, providing essential situational awareness for safe navigation. The CSH-5L and CSH-8L also support integration with other onboard systems, including ECDIS (Electronic Chart Display and Information System), which enhances the overall effectiveness of maritime navigation.

In summary, the Furuno CSH-5L and CSH-8L radar systems represent the forefront of marine radar technology, offering exceptional detection capabilities, user-friendly controls, and robust integration options. Their advanced features ensure that mariners can navigate confidently, making them a vital asset for anyone operating in the marine environment.
Top Page Image Contents