Furuno CSH-5L/CSH-8L manual Panel test

Page 79

8. MAINTENANCE, TROUBLESHOOTING

Panel test

The panel test checks the controls on the control unit for proper operation.

1.Press a key. If the key is normal, “1” is shown at the key’s on-screen location when the key is pressed; “0” when it is released. (The POWER switch cannot be checked.)

2.Operate the TILT lever. If the lever is normal, “1” appears when increasing the tilt angle, “2” when decreasing the tilt angle and “0” when the lever is released.

3.Operate the trackball. Its X-Y coordinate changes with trackball rotation. The coordinates are “0” until the trackball is operated.

4.Operate the [GAIN] and [RANGE] controls. The on-screen indication is “-1” with counterclockwise rotation and “1” with clockwise rotation.

PANEL TEST


		0	0
0	0				0
0	0	0	0	0	0

X=0

Y=0

Trackball position in

X-Y coordinate

PRESS [MENU] KEY TO EXIT

Panel test

8-9

Image 79

Contents Color Scanning Sonar 00080940402 Safety Instructions Turn off the hull unit before using the hand crank Table of Contents Marks and Data Index Foreword FeaturesWord to the Owner of the CSH-5L/CSH-8L System configuration of CSH-5L System ConfigurationVii Viii System configuration of CSH-8LControl Unit Operational OverviewControl unit Remote controller Remote Controller optionTurning on the power Basic Operating ProcedureLowering the transducer Sonar menu TransmittingSystem menu Adjusting backlighting of control unitCOMBI-1 Choosing a display modeMode description Description Display NormCOMBI-1 display sonar display + audio display Normal mode display sonar displaySonar display COMBI-1 display sonar display + audio displayDetection range Choosing the display rangeCOMBI-2 display sonar display + echosounder display COMBI-2 display sonar display + echosounder displayRetracting the transducer, turning off the power Adjusting the gainExamples of proper and improper gain Automatic tilt on/off Setting the Tilt AngleTilt range Range m ±2-10 ±4-14 ±6-20 ±10-26 Range and tilt angleAuto tilt concept Case 2 Tilt angle 10 to 20 degrees How to discriminate fish echoes from the bottomBottom and tilt angle Case 1 Tilt angle 30 to 40 degreesTilt angle for surface fish Points to considerTilt angle and surface fish example CSH-5L Location of trackball data Finding Range and Bearing to a TargetSuitable tilt angle Depth, detection range and tilt angleSonar Menu Overview Operating procedureDescription of sonar menu Sonar menu descriptionDescription Ref. Description of sonar menu con’t from previous This page intentionally left blank Eliminating Unwanted Echoes Fine Tuning the Sonar PictureHow TVG works Suppressing Bottom Tail Displaying Surface Fish Clearly1 AGC 3 2ND AGC Pulse lengthHow to adjust TX output Rejecting noise with the noise limiter Rejecting Sonar Interference and NoiseIdentifying noise source Rejecting noise with the interference rejectorInterference rings Rejecting interference with TX cycleHorizontal beamwidth Choosing BeamwidthDeleting Weak Echoes Echo AveragingThis page intentionally left blank Tracking a Fish School target lock Advanced Sonar OperationTarget lock mark and target lock data Target lock and tilt angle Detecting Fish Schools Aurally Fish alarm zone Fish AlarmFish alarm zones Entering a fish mark Measuring Fish School SpeedFish mark and fish mark data Relocating Fish School for Easy Observation How to use the off-center functionDeleting individual fish marks Entering an event mark How to use the event markEvent Mark, Own Ship Position Mark Event markDeleting an event mark Entering an own ship position markEvent marks Track Collectively Deleting MarksShip Erase Marks dialog box Function Keys F1-F4Operating the function keys Programming for fishing ground or target fishBeamwidth Color Curve Response Programming specific functionUseful programs main items only TX Output Pulse Length TX Cycle TVG Near TVG FAR HORFunction key assignment confirmation screen Confirming function key programHow the stabilizer works Suppressing Effects of Pitching and Rolling StabilizerStabilizer mark Advanced Sonar Operation Choosing the Range Echosounder ModeDisplay range and shift concept Sounder menu Adjusting the GainMeasuring Depth Picture Advance SpeedMeasuring depth Clutter Suppressing InterferenceSuppressing Low Level Noise InterferenceWeak echoes Erasing Weak EchoesDraft Other Items on the Sounder MenuSounder menu description CurveMarks and Data on the Normal Display Marks and DataMarks and data on the normal display Points to North Heading Mark Description of marks and data on the normal displayMarks and Data Press the R/B key. Own ship position and trackball mark are Marks and data on the echosounder and audio displays Marks and Data on the Echosounder and Audio DisplaysOn the System menu Bottom Echo Interpreting the DisplayBottom echoes Fish echoes Fish SchoolWake Sea Surface ReflectionsWake Sea surface reflectionsNoise and interference False Echo by SidelobeNoise and Interference Sidelobe echoMarks Menu Marks and System MenusMarks menu Marks menu description Disp Select System MenuSystem menu Description of System menu DimmerDescription of System menu con’t from previous General Maintenance MAINTENANCE, TroubleshootingCleaning the Equipment Hull unit maintenance points Hull Unit MaintenanceLubrication points, zinc plate Hull unit Manually raising the transducerHand crank Type Code No Fuse ReplacementFan Replacement Unit Fuse Type Code NoSymptom Check, Remedy TroubleshootingHigh speed Error MessagesMessage Meaning, Remedy Overvoltage Transducer not retractedChoosing a diagnostic test Diagnostic TestsSingle test, Continuous test Description of diagnostic testsContinuous test example CSH-5L, 55 kHz transducer Panel test Panel testPattern test Color testWhite RED Green Blue Color testSIO test SIO testEcho tests Echo testsSpecifications of Color Scanning Sonar CSH-5L/8L Hull Unit Interface This page is intentionally left blank AP-1 Menu TreeSonar menu Sounder menuSystem menu Marks menuAP-2 IN-1 Index

CSH-5L/CSH-8L specifications

Furuno CSH-5L and CSH-8L are advanced marine radar systems known for their cutting-edge technology and user-friendly interfaces. Designed primarily for maritime applications, these radar units cater to a wide range of vessels, from commercial ships to fishing boats. The primary distinguishing feature of the CSH-5L and CSH-8L radar systems lies in their ability to provide high-resolution images and precise detection of targets, ensuring navigational safety and operational efficiency on the water.

One of the standout technologies incorporated into both models is the pulse compression technique. This feature significantly enhances target resolution and minimizes blind spots, allowing the radar to detect smaller objects at greater distances. With the CSH-5L and CSH-8L's powerful signal processing capabilities, users can expect exceptional performance even in challenging weather conditions, ensuring reliable operation during storms or fog.

The CSH-5L model operates at a frequency range of 5 GHz, while the CSH-8L uses an 8 GHz frequency. Both radars are equipped with a rotating antenna that provides a wide coverage range, allowing for efficient monitoring of the surrounding marine environment. Their high sensitivity and low noise levels enhance target detection, making them particularly useful for locating small fishing vessels or buoys.

Another important characteristic of the Furuno CSH-5L and CSH-8L is their user-friendly interfaces. Both models feature intuitive controls, allowing operators to adjust settings easily and access critical information quickly. The displays are designed for clarity, enabling users to distinguish between targets and navigate effectively.

Additionally, the radar systems include advanced features such as automatic target tracking and target acquisition capabilities. This functionality allows users to monitor multiple targets simultaneously, providing essential situational awareness for safe navigation. The CSH-5L and CSH-8L also support integration with other onboard systems, including ECDIS (Electronic Chart Display and Information System), which enhances the overall effectiveness of maritime navigation.

In summary, the Furuno CSH-5L and CSH-8L radar systems represent the forefront of marine radar technology, offering exceptional detection capabilities, user-friendly controls, and robust integration options. Their advanced features ensure that mariners can navigate confidently, making them a vital asset for anyone operating in the marine environment.