Furuno CSH-5L/CSH-8L manual Hull Unit Maintenance, Lubrication points, zinc plate

Page 72

8. MAINTENANCE, TROUBLESHOOTING

8.3Hull Unit Maintenance

8.3.1Lubrication points, zinc plate

The zinc plate attached near the transducer must be replaced every year.

The junction between the main shaft and transducer may corrode, which may result in the loss of the transducer or water leakage in the vessel.

HULL UNIT

Apply MOLYTONE grease #2 (or equivalent)

every six months.

Raise transducer and coat main shaft with DAPHAECOROAEX #2 (or equivalent) every six months.

Dry dock ship and clean transducer face yearly. Apply single coat of "MARINE STAR 20 Mod (Red-N)" (or equivalent) anti-foulant to transducer face to keep marine life off the transducer. Do not use solvents to clean the trans- ducer and do not paint the transducer face.

Hull unit maintenance points

8-2

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Color Scanning Sonar 00080940402 Safety Instructions Turn off the hull unit before using the hand crank Table of Contents Marks and Data Index Features ForewordWord to the Owner of the CSH-5L/CSH-8L System Configuration System configuration of CSH-5LVii System configuration of CSH-8L ViiiOperational Overview Control UnitControl unit Remote Controller option Remote controllerBasic Operating Procedure Turning on the powerLowering the transducer Transmitting Sonar menuAdjusting backlighting of control unit System menuChoosing a display mode Mode description Description DisplayNorm COMBI-1Normal mode display sonar display Sonar displayCOMBI-1 display sonar display + audio display COMBI-1 display sonar display + audio displayChoosing the display range COMBI-2 display sonar display + echosounder displayCOMBI-2 display sonar display + echosounder display Detection rangeAdjusting the gain Retracting the transducer, turning off the powerExamples of proper and improper gain Setting the Tilt Angle Automatic tilt on/offTilt range Range and tilt angle Range m ±2-10 ±4-14 ±6-20 ±10-26Auto tilt concept How to discriminate fish echoes from the bottom Bottom and tilt angleCase 1 Tilt angle 30 to 40 degrees Case 2 Tilt angle 10 to 20 degreesPoints to consider Tilt angle for surface fishTilt angle and surface fish example CSH-5L Finding Range and Bearing to a Target Suitable tilt angleDepth, detection range and tilt angle Location of trackball dataOperating procedure Sonar Menu OverviewSonar menu description Description of sonar menuDescription Ref. Description of sonar menu con’t from previous This page intentionally left blank Fine Tuning the Sonar Picture Eliminating Unwanted EchoesHow TVG works Displaying Surface Fish Clearly Suppressing Bottom Tail1 AGC Pulse length 3 2ND AGCHow to adjust TX output Rejecting Sonar Interference and Noise Identifying noise sourceRejecting noise with the interference rejector Rejecting noise with the noise limiterRejecting interference with TX cycle Interference ringsChoosing Beamwidth Deleting Weak EchoesEcho Averaging Horizontal beamwidthThis page intentionally left blank Advanced Sonar Operation Tracking a Fish School target lockTarget lock mark and target lock data Target lock and tilt angle Detecting Fish Schools Aurally Fish Alarm Fish alarm zoneFish alarm zones Measuring Fish School Speed Entering a fish markFish mark and fish mark data How to use the off-center function Relocating Fish School for Easy ObservationDeleting individual fish marks How to use the event mark Event Mark, Own Ship Position MarkEvent mark Entering an event markEntering an own ship position mark Deleting an event markEvent marks Collectively Deleting Marks TrackShip Function Keys F1-F4 Operating the function keysProgramming for fishing ground or target fish Erase Marks dialog boxProgramming specific function Useful programs main items onlyTX Output Pulse Length TX Cycle TVG Near TVG FAR HOR Beamwidth Color Curve ResponseConfirming function key program Function key assignment confirmation screenSuppressing Effects of Pitching and Rolling Stabilizer How the stabilizer worksStabilizer mark Advanced Sonar Operation Echosounder Mode Choosing the RangeDisplay range and shift concept Adjusting the Gain Sounder menuPicture Advance Speed Measuring DepthMeasuring depth Suppressing Interference Suppressing Low Level NoiseInterference ClutterErasing Weak Echoes Weak echoesOther Items on the Sounder Menu Sounder menu descriptionCurve DraftMarks and Data Marks and Data on the Normal DisplayMarks and data on the normal display Description of marks and data on the normal display Points to North Heading MarkMarks and Data Press the R/B key. Own ship position and trackball mark are Marks and Data on the Echosounder and Audio Displays Marks and data on the echosounder and audio displaysOn the System menu Interpreting the Display Bottom EchoBottom echoes Fish School Fish echoesSea Surface Reflections WakeSea surface reflections WakeFalse Echo by Sidelobe Noise and InterferenceSidelobe echo Noise and interferenceMarks and System Menus Marks MenuMarks menu Marks menu description System Menu System menu Description of System menuDimmer Disp SelectDescription of System menu con’t from previous MAINTENANCE, Troubleshooting General MaintenanceCleaning the Equipment Hull Unit Maintenance Hull unit maintenance pointsLubrication points, zinc plate Manually raising the transducer Hull unitHand crank Fuse Replacement Fan ReplacementUnit Fuse Type Code No Type Code NoTroubleshooting Symptom Check, RemedyError Messages Message Meaning, Remedy OvervoltageTransducer not retracted High speedDiagnostic Tests Choosing a diagnostic testDescription of diagnostic tests Single test, Continuous testContinuous test example CSH-5L, 55 kHz transducer Panel test Panel testColor test White RED Green BlueColor test Pattern testSIO test SIO testEcho tests Echo testsSpecifications of Color Scanning Sonar CSH-5L/8L Hull Unit Interface This page is intentionally left blank Menu Tree Sonar menuSounder menu AP-1Marks menu System menuAP-2 Index IN-1

CSH-5L/CSH-8L specifications

Furuno CSH-5L and CSH-8L are advanced marine radar systems known for their cutting-edge technology and user-friendly interfaces. Designed primarily for maritime applications, these radar units cater to a wide range of vessels, from commercial ships to fishing boats. The primary distinguishing feature of the CSH-5L and CSH-8L radar systems lies in their ability to provide high-resolution images and precise detection of targets, ensuring navigational safety and operational efficiency on the water.

One of the standout technologies incorporated into both models is the pulse compression technique. This feature significantly enhances target resolution and minimizes blind spots, allowing the radar to detect smaller objects at greater distances. With the CSH-5L and CSH-8L's powerful signal processing capabilities, users can expect exceptional performance even in challenging weather conditions, ensuring reliable operation during storms or fog.

The CSH-5L model operates at a frequency range of 5 GHz, while the CSH-8L uses an 8 GHz frequency. Both radars are equipped with a rotating antenna that provides a wide coverage range, allowing for efficient monitoring of the surrounding marine environment. Their high sensitivity and low noise levels enhance target detection, making them particularly useful for locating small fishing vessels or buoys.

Another important characteristic of the Furuno CSH-5L and CSH-8L is their user-friendly interfaces. Both models feature intuitive controls, allowing operators to adjust settings easily and access critical information quickly. The displays are designed for clarity, enabling users to distinguish between targets and navigate effectively.

Additionally, the radar systems include advanced features such as automatic target tracking and target acquisition capabilities. This functionality allows users to monitor multiple targets simultaneously, providing essential situational awareness for safe navigation. The CSH-5L and CSH-8L also support integration with other onboard systems, including ECDIS (Electronic Chart Display and Information System), which enhances the overall effectiveness of maritime navigation.

In summary, the Furuno CSH-5L and CSH-8L radar systems represent the forefront of marine radar technology, offering exceptional detection capabilities, user-friendly controls, and robust integration options. Their advanced features ensure that mariners can navigate confidently, making them a vital asset for anyone operating in the marine environment.
Top Page Image Contents