Datacom Systems VS series SPAN, SS series SPAN manual Compliance Testing, Certifications

4 Datacom Systems Inc

Compliance Testing

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for com- pliance could void the user’s authority to operate the equipment.

Certifications

This equipment has been tested and found to meet the radiated and conducted emission limits for a Class A product of EN 55022 to the EMC Directive 89/336/EEC requirements.

This equipment has been tested and found to meet the immunity levels for Class 1 tested to level 2 for EN 6100-4-2,level 3 for EN 61000-4-3,level 1 for EN 61000-4-4,and level 3 for EN 61000-4-5to the EN 50082-1requirements and meets the Class A requirements for EN 61000-3-2and EN 61000-3- 3.

This equipment has completed the Product Safety Review and found to meet the Low Voltage Directive 72/23/EEC (1993) requirements.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener- ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

These explanatory labels are included in

the information for the user in accordanceCLASS 1 LASER PRODUCT with the requirements of IEC 60825-1.

SPAN and Multi-Link Aggregators/Regenerators • USERguide