CyberPower Systems OP650 user manual Battery Replacement Procedure

Page 7

OP650

Guaranteed Uninterruptible Power System

BATTERY REPLACEMENT PROCEDURE:

1.Turn off and unplug all connected equipment.

2.Turn the UPS off and unplug it from the AC power source.

3.Turn the UPS upside down.

4.Remove the 4 retaining screws and remove the cover.

5.Remove the battery from the compartment.

6.Disconnect the battery wires from the battery.

7.Install the replacement battery by connecting the red wire to the positive (+) terminal of the battery and connecting the black wire to the negative (-) terminal of the battery.

8.Slide the battery back into the compartment.

9.Replace the cover and the 4 retaining screws.

10.Recharge the unit for 4 – 8 hours to ensure the UPS performs expected runtime

REMINDER: Batteries are consider HAZARDOUS WASTE and must be disposed of properly. Contact your local government for more information about proper disposal and recycling of batteries.

STORAGE:

First turn off your UPS and disconnect its power cord from the wall outlet. Disconnect all cables connected to the UPS to avoid battery drain. To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the battery every three months to insure battery life. If the battery remains uncharged for an extended period of time, it may suffer permanent loss of capacity.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User’s Manual Office Series UPS Table of Contents 莤 莤 耟 耟 莤 莤 Important Safety Warnings Basic Operation Installing Your UPS SystemPower Switch Circuit Breaker Reset for Overload Protection Battery Replacement and StorageBattery Replacement Procedure Problem Possible Cause Solution TroubleshootingModel OP650 Technical SpecificationsBuck Breaker Alarm Fault Definitions for Illuminated LED IndicatorsRegistration Limited Warranty Limited Warranty and Power Control GuaranteeMaking a Limited Warranty Claim Exclusive Remedies Under Limited WarrantyCyberPower’s Duties Making a Power Control Guarantee ClaimPage Exclusion of Consequential and Other Damages FCC Notice Email sales@cyberpowersystems.com

OP650 specifications

CyberPower Systems OP650 is a versatile uninterruptible power supply (UPS) that addresses the growing need for reliable power protection in today's technology-driven environments. Designed for both home and office use, the OP650 provides an effective solution against power outages, surges, and fluctuations, ensuring that critical devices remain operational even during unforeseen disruptions.

One of the standout features of the OP650 is its ability to deliver a stable output of 650VA/390W, making it suitable for powering essential electronics such as computers, networking equipment, and other peripheral devices. With a compact and lightweight design, it allows for easy placement in various settings without occupying too much space.

The OP650 utilizes a microprocessor-controlled technology that enhances performance and monitoring capabilities. This technology ensures precise voltage regulation, allowing the UPS to maintain a consistent output even when input voltage levels fluctuate. This is particularly beneficial for sensitive electronics that require stable power for optimal performance.

In terms of connectivity, the OP650 comes equipped with multiple outlets that accommodate various devices. Typically, it features a combination of battery backup and surge-protected outlets, which enable users to connect critical equipment while safeguarding them from power spikes. The unit also includes USB ports, providing additional convenience for charging mobile devices or connecting to computers for monitoring purposes.

Another notable characteristic of the OP650 is its user-friendly LCD display. This display provides real-time information regarding battery status, load levels, and other important metrics, allowing users to stay informed about their power environment. Furthermore, the UPS is designed with audible alarms that alert users to critical events such as low battery, power failure, and overload conditions.

The OP650 also boasts automatic voltage regulation (AVR) technology, which stabilizes output voltage during brownouts and overvoltages without switching to battery mode. This ensures that connected equipment remains powered and stable during minor power fluctuations, contributing to an extended battery life and reducing unnecessary wear and tear on the battery.

Overall, the CyberPower Systems OP650 is an exceptional UPS that combines advanced technology, user-friendly features, and reliable performance. It stands as an essential asset for individuals and businesses looking to protect their investments in electronic equipment, ensuring peace of mind in the face of unpredictable power conditions.
Top Page Image Contents