CyberPower Systems OP650 user manual Troubleshooting, Problem Possible Cause Solution

Page 8

TROUBLESHOOTING

Problem

Possible Cause

Solution

The UPS does not

Batteries are not fully charged.

Recharge the battery by leaving the

perform expected

 

UPS plugged in.

runtime.

 

 

 

Battery is slightly worn out.

Contact CyberPower Systems at

 

 

tech@cyberpowersystems.com

 

 

 

The UPS will not

The on/off switch is designed to

Turn the UPS off. Wait 10 seconds

turn on.

prevent damage by rapidly turning

and then turn the UPS on.

 

it off and on.

 

 

 

 

 

The unit is not connected to an AC

The unit must be connected to a

 

outlet.

110/120v 60Hz outlet.

 

 

 

 

The battery is worn out.

Contact CyberPower Systems at

 

 

tech@cyberpowersystems.com

 

 

 

 

Mechanical problem.

Contact CyberPower Systems at

 

 

tech@cyberpowersystems.com

 

 

 

Outlets do not

Circuit breaker is tripped due to

Turn the UPS off and unplug at least

provide power to

overload

one piece of equipment. Wait 10

equipment

 

seconds, reset the circuit breaker

 

 

and then turn the UPS on.

 

 

 

 

Batteries are discharged

Allow the unit to recharge for at least

 

 

4 hours.

 

 

 

 

Unit has been damaged by a

Contact CyberPower Systems at

 

surge or spike.

tech@cyberpowersystems.com

 

 

 

PowerPanel Plus™

The serial cable is not connected.

Connect the serial cable to the

is inactive (all icons

 

UPS unit and an open serial

are gray).

 

port on the back of the

 

 

computer. You must use the

 

 

cable that came with the unit.

 

The serial cable is connected to

Check the back of the computer

 

the wrong port.

for an additional serial port.

 

 

Move the cable to this port.

 

The unit is not providing battery

Shutdown your computer and

 

power.

turn the UPS off. Wait 10

 

 

seconds and turn the UPS back

 

 

on. This should reset the unit.

 

The serial cable is not the cable

You must use the cable that

 

that was provided with the unit.

was included with the unit for

 

 

the software and the unit to be

 

 

able to communicate.

6

Image 8
Contents User’s Manual Office Series UPS Table of Contents 莤 莤 耟 耟 莤 莤 Important Safety Warnings Installing Your UPS System Basic OperationPower Switch Battery Replacement and Storage Circuit Breaker Reset for Overload ProtectionBattery Replacement Procedure Troubleshooting Problem Possible Cause SolutionTechnical Specifications Model OP650Definitions for Illuminated LED Indicators Buck Breaker Alarm FaultLimited Warranty and Power Control Guarantee Registration Limited WarrantyExclusive Remedies Under Limited Warranty Making a Limited Warranty ClaimMaking a Power Control Guarantee Claim CyberPower’s DutiesPage Exclusion of Consequential and Other Damages Email sales@cyberpowersystems.com FCC Notice

OP650 specifications

CyberPower Systems OP650 is a versatile uninterruptible power supply (UPS) that addresses the growing need for reliable power protection in today's technology-driven environments. Designed for both home and office use, the OP650 provides an effective solution against power outages, surges, and fluctuations, ensuring that critical devices remain operational even during unforeseen disruptions.

One of the standout features of the OP650 is its ability to deliver a stable output of 650VA/390W, making it suitable for powering essential electronics such as computers, networking equipment, and other peripheral devices. With a compact and lightweight design, it allows for easy placement in various settings without occupying too much space.

The OP650 utilizes a microprocessor-controlled technology that enhances performance and monitoring capabilities. This technology ensures precise voltage regulation, allowing the UPS to maintain a consistent output even when input voltage levels fluctuate. This is particularly beneficial for sensitive electronics that require stable power for optimal performance.

In terms of connectivity, the OP650 comes equipped with multiple outlets that accommodate various devices. Typically, it features a combination of battery backup and surge-protected outlets, which enable users to connect critical equipment while safeguarding them from power spikes. The unit also includes USB ports, providing additional convenience for charging mobile devices or connecting to computers for monitoring purposes.

Another notable characteristic of the OP650 is its user-friendly LCD display. This display provides real-time information regarding battery status, load levels, and other important metrics, allowing users to stay informed about their power environment. Furthermore, the UPS is designed with audible alarms that alert users to critical events such as low battery, power failure, and overload conditions.

The OP650 also boasts automatic voltage regulation (AVR) technology, which stabilizes output voltage during brownouts and overvoltages without switching to battery mode. This ensures that connected equipment remains powered and stable during minor power fluctuations, contributing to an extended battery life and reducing unnecessary wear and tear on the battery.

Overall, the CyberPower Systems OP650 is an exceptional UPS that combines advanced technology, user-friendly features, and reliable performance. It stands as an essential asset for individuals and businesses looking to protect their investments in electronic equipment, ensuring peace of mind in the face of unpredictable power conditions.