Ordering Information, Package Diagrams | Cypress CY7C1353G specification

CY7C1353G

Ordering Information

Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or visit www.cypress.com for actual products offered.

Speed	Ordering Code	Package	Part and Package Type	Operating
(MHz)	Ordering Code	Diagram	Part and Package Type	Range

133	CY7C1353G-133AXC	51-85050	100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Pb-Free	Commercial

	CY7C1353G-133AXI			lndustrial

100	CY7C1353G-100AXC	51-85050	100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Pb-Free	Commercial

	CY7C1353G-100AXI			lndustrial

Package Diagrams

100-Pin TQFP (14 x 20 x 1.4 mm) (51-85050)

16.00±0.20

14.00±0.10

1.40±0.05

100	81
1	80

22.00±0.20

20.00±0.10

0.30±0.08

0.65	12° ±1°
TYP.	(8X)

SEE DETAIL

0.20 MAX.

1.60 MAX.

R 0.08 MIN. 0.20 MAX.

0.25

0° MIN.

SEATING PLANE

STAND-OFF

0.05 MIN.NOTE:

0.15 MAX.

0.10

GAUGE PLANE

0° -7°

0.60±0.15

1.00 REF.

R 0.08 MIN. 0.20 MAX.

0.20 MIN.

DETAIL A

1.JEDEC STD REF MS-026

2.BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH MOLD PROTRUSION/END FLASH SHALL NOT EXCEED 0.0098 in (0.25 mm) PER SIDE BODY LENGTH DIMENSIONS ARE MAX PLASTIC BODY SIZE INCLUDING MOLD MISMATCH

3.DIMENSIONS IN MILLIMETERS

51-85050-*B

ZBT is a trademark of Integrated Device Technology, Inc. NoBL and No Bus Latency are trademarks of Cypress Semiconductor. All product and company names mentioned in this document are the trademarks of their respective holders.

Document #: 38-05515 Rev. *E

Page 12 of 13

© Cypress Semiconductor Corporation, 2004-2007. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

[+] Feedback