Cyclades 2500, 5000 quick start Running the First Time Configuration Wizard

Page 5

3. Running the First Time Configuration Wizard

.

Figure 8: Private Network Setup

3. Running the First Time Configuration Wizard

The First Time Configuration Wizard includes parameters such as root and admin passwords, network configuration parameters, and time and date.You need to run the First Time Configuration Wizard from a serial terminal (or terminal emulator such as Hyper Terminal) connected to the serial console port on the AlterPath Manager.

TTo Run the First Time Configuration Wizard

1.Before you power on the AlterPath Manager, connect one end of a DB-9 to DB-9 Null Modem cable (or equivalent) to the console port of the AlterPath Manager.

2.Connect the other end of the cable to a terminal or computer’s serial port.

3.Using the terminal or a terminal emulation program installed on a computer, start a session with the following settings:

9600 BPS

8 data bits

5

Image 5
Contents To Rail Mount an APM 2500 or Rack Mounting the AlterPath ManagerTo Bracket Mount an APM APM E2000 Front View Making the Ethernet ConnectionMaking the Ethernet Connection To Set up a Single NetworkSingle Network Setup To Set up a Private NetworkTo Run the First Time Configuration Wizard Running the First Time Configuration WizardAlterPath Manager E2000, 2500, 5000 Quick Start Guide Running the First Time Configuration Wizard To Connect to the APM Web Management Interface Connecting to the Web Management Interface WMI
Related manuals
Manual 2 pages 40.54 Kb