DC Characteristics, Ordering Information

CY7C68023/CY7C68024

11.0DC Characteristics

Parameter	Description		Conditions	Min.	Typ.	Max.	Unit
VCC	Supply Voltage			3.0	3.3	3.6	V
VCC Ramp	Supply Ramp-up 0V to 3.3V			200			∝s
VIH	Input High Voltage			2		5.25	V
VIL	Input Low Voltage			–0.5		0.8	V
II	Input Leakage Current		0 < VIN < VCC			±10	∝A
VIH_X	Crystal Input HIGH Voltage			2		5.25	V
VIL_X	Crystal Input LOW Voltage			–0.5		0.8	V
VOH	Output Voltage High		IOUT = 4 mA	2.4			V
VOL	Output Voltage Low		IOUT = –4 mA			0.4	V
IOH	Output Current High					4	mA
IOL	Output Current Low					4	mA
CIN	Input Pin Capacitance		All but D+/D–			10	pF
			Only D+/D–			15	pF

ICC	Supply Current		USB High Speed		50		mA
			USB Full Speed		35		mA

I	Suspend Current	CY7C68023	Connected		0.5	1.2[3]	mA
SUSP
			Disconnected		0.3	1.0[3]	mA
		CY7C68024	Connected		300	380[3]	∝A
			Disconnected		100	150[3]	∝A
IUNCONFIG	Unconfigured Current		Before current requested in USB		43		mA
			descriptors is granted by the host
TRESET	Reset Time After Valid Power		VCC > 3.0V	5.0			mS
	Pin Reset After Valid Startup			200			∝S

The NX2LP’s USB interface complies with the USB 2.0 speci- fication for bus-powered devices.

The NX2LP supports 30-ns, 50-ns, and 100-ns NAND Flash devices.

Part Number	Package Type
CY7C68023-56LFXC	56-pin QFN Lead-free For Self/Bus Power

CY7C68024-56LFXC	56-pin QFN Lead-free For Battery Power

CY3685	EZ-USB NX2LP Development Kit

CY4618	EZ-USB NX2LP Reference Design Kit

Note:

3.Measured at Max VCC, 25°C.

Document #: 38-08055 Rev. *B

Page 7 of 9

[+] Feedback