Mark Levinson N32 owner manual Naming a phono input Setting the phono gain

Page 21

naming a phono input

setting the phono gain

between the output level of a given source and the preamplifier’s gain structure.

Offset— automatic volume adjustments implemented whenever switching to this particular input, used to ensure

that all sources play back at the same volume, even when their outputs may be quite different; the range is ±20.0 dB in 0.1 dB increments.

Balance— unique to phono inputs, this is used to correct for the seemingly inevitable small imbalances seen in all almost cartridges.

20 Hz High Pass Filter— sometimes called an “infra- sonic” or a “subsonic” filter; used to minimize noise below 20Hz found in most turntable/tonearm/cartridge systems. It may be switched on or off independently for each input.

Resistive Loading— the “termination” provided by the phono preamplifier to the turntable’s phono signal. Differ- ent moving coil cartridge designs require different values for optimum performance.

Capacitive Loading— the “termination” provided by the phono preamplifier to the turntable’s phono signal. Differ- ent moving magnet cartridge designs require different val- ues for optimum performance.

21

The Name for the phono inputs may be either PHONO, or a custom name (chosen one letter at a time, and indicated by the flashing under- lines alternating with the current custom name), or UNUSED for an unused input connector. (Recall that setting an input as UNUSED re- moves it from the rotation of inputs shown when you turn the select knob during day-to-day operation.)

You may use custom names with the phono inputs, just as you would with any other input. By default, Phono 1 is custom-named PH/MC 1 and its setting are appropriate for most moving coil cartridges; Phono

2 is custom-named PH/MM 2 and its settings are appropriate for most moving magnet cartridges. All these settings may be changed to suit the needs of your system.

Ph Gain refers to the gain of the phono preamp. You may select either 40 dB for moving magnet cartridges and high output moving coils, or 60 dB for low output moving coils. Note that there is no additional gain stage for the 60 dB setting; rather, the gain of the overall phono circuitry is changed by switching precision resistor values in key loca- tions of the circuit.

Image 21
Contents Nº32 Reference Phono Modules Page Important Safety Instructions Page Table of Contents Special Design Features of the Nº32 Reference Preamplifier Ac regenerated power supply Fully balanced design Instrumentation amplifier topology Page Unpacking Operating Voltage Installing the Nº32 Reference Phono Preamplifier Modules Material needed Installation procedure Slide top cover back slightly then up and off Resulting in… This Not All four connections It would hinder your replacing the top cover, next Customizing Your Nº32 Configuring phono inputs Naming a phono input Setting the phono gain Setting line gain Setting the offset Page Setting the capacitive load Installing a Custom Load Page Loosen each gold thumb screw a few turns Be careful not to cross thread these relatively small screws Care and Maintenance Canadian Warranty Obtaining Service Input impedance SpecificationsInstallation Notes Madrigal Audio Laboratories

N32 specifications

The Mark Levinson N32 is a sophisticated audio preamplifier known for its exceptional performance and advanced technology. Designed for audiophiles and music enthusiasts, the N32 delivers a seamless integration of high-fidelity sound with a user-friendly interface, making it an ideal choice for any high-end audio system.

One of the standout features of the N32 is its innovative design. The preamp utilizes a fully balanced signal path that minimizes noise and distortion, ensuring that the music is delivered in its purest form. This balanced architecture is complemented by premium-quality components that are meticulously selected for their sonic properties. The N32 boasts a high signal-to-noise ratio, providing an expansive dynamic range that brings out the subtleties in music.

The N32 is equipped with a robust power supply that enhances performance by delivering stable voltage and current to the internal circuits. This power supply is specifically designed to handle the demands of high-resolution audio sources while reducing the likelihood of interference. As a result, users can expect clear, detailed sound reproduction that captures every nuance of the recording.

Another notable technology employed in the N32 is the use of digital signal processing (DSP). This allows for precise control over various audio parameters, enabling users to tailor their listening experience to personal preferences. With features such as adjustable gain, tone control, and digital filters, the N32 caters to a wide range of playback needs, ensuring optimal sound quality regardless of the audio source.

In terms of connectivity, the Mark Levinson N32 offers a versatile array of inputs and outputs. It supports various analog and digital formats, allowing users to connect a range of devices, from CD players to streaming services. The inclusion of both balanced XLR and unbalanced RCA inputs ensures compatibility with a broad spectrum of audio components.

Additionally, the N32 comes equipped with a refined user interface that enhances accessibility. The intuitive layout and clear display make it easy to navigate through settings and options, further enriching the overall user experience.

In summary, the Mark Levinson N32 represents a culmination of state-of-the-art technology and meticulous engineering. With its balanced signal path, robust power supply, digital signal processing capabilities, and versatile connectivity options, it establishes itself as a prominent choice for those seeking unparalleled audio performance. Whether you are a casual listener or a dedicated audiophile, the N32 promises to elevate your music experience to new heights.