Mark Levinson N32 owner manual Specifications, Input impedance

Page 32

32

Specifications

The correlation between published specifications and sonic quality is unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation.

Measurements of the Nº32 yield excellent results by any standards. However, only those specifications that apply to its actual operation are included here.

■Frequency response:

 

RIAA response

±0.1 dB

 

RIAA/IEC response

+0.1, -0.3 dB

■

Gain:

either 40 or 60 dB

■

THD + N:

 

 

2V out, 1 kHz test signal, 80 kHz measurement bandwidth

less than 0.008%

■Residual noise

 

ref to output w/500∝V, 1 kHz at input, unweighted:

-69 dB

■

Input connectors:

2x Madrigal RCA per channel,

 

Input impedance:

or 2x Neutrik XLR per channel

■

 

(user selectable)

 

Resistive:

3.3Ω, 5Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ

 

Capacitive:

0pF, 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01∝F

Gold-plated, solderless terminals are available for user-installed load value, inside phono module.

■Input overload:

1kHz, 60 dB gain:

16mV on XLR, 8mV on RCA

1kHz, 40 dB gain:

160mV on XLR, 80mV on RCA

For more information, see your Mark Levinson dealer, or contact:

Madrigal Audio Laboratories, Inc.

P. O. Box 781

2081 South Main Street

Middletown, Connecticut 06457 USA

phone

(860) 346-0896

fax

(860) 346-1540

internet

www.madrigal.com

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Nº32 Reference Phono Modules Page Important Safety Instructions Page Table of Contents Special Design Features of the Nº32 Reference Preamplifier Ac regenerated power supply Fully balanced design Instrumentation amplifier topology Page Unpacking Operating Voltage Installing the Nº32 Reference Phono Preamplifier Modules Material needed Installation procedure Slide top cover back slightly then up and off Resulting in… This Not All four connections It would hinder your replacing the top cover, next Customizing Your Nº32 Configuring phono inputs Naming a phono input Setting the phono gain Setting line gain Setting the offset Page Setting the capacitive load Installing a Custom Load Page Loosen each gold thumb screw a few turns Be careful not to cross thread these relatively small screws Care and Maintenance Canadian Warranty Obtaining Service Specifications Input impedanceInstallation Notes Madrigal Audio Laboratories

N32 specifications

The Mark Levinson N32 is a sophisticated audio preamplifier known for its exceptional performance and advanced technology. Designed for audiophiles and music enthusiasts, the N32 delivers a seamless integration of high-fidelity sound with a user-friendly interface, making it an ideal choice for any high-end audio system.

One of the standout features of the N32 is its innovative design. The preamp utilizes a fully balanced signal path that minimizes noise and distortion, ensuring that the music is delivered in its purest form. This balanced architecture is complemented by premium-quality components that are meticulously selected for their sonic properties. The N32 boasts a high signal-to-noise ratio, providing an expansive dynamic range that brings out the subtleties in music.

The N32 is equipped with a robust power supply that enhances performance by delivering stable voltage and current to the internal circuits. This power supply is specifically designed to handle the demands of high-resolution audio sources while reducing the likelihood of interference. As a result, users can expect clear, detailed sound reproduction that captures every nuance of the recording.

Another notable technology employed in the N32 is the use of digital signal processing (DSP). This allows for precise control over various audio parameters, enabling users to tailor their listening experience to personal preferences. With features such as adjustable gain, tone control, and digital filters, the N32 caters to a wide range of playback needs, ensuring optimal sound quality regardless of the audio source.

In terms of connectivity, the Mark Levinson N32 offers a versatile array of inputs and outputs. It supports various analog and digital formats, allowing users to connect a range of devices, from CD players to streaming services. The inclusion of both balanced XLR and unbalanced RCA inputs ensures compatibility with a broad spectrum of audio components.

Additionally, the N32 comes equipped with a refined user interface that enhances accessibility. The intuitive layout and clear display make it easy to navigate through settings and options, further enriching the overall user experience.

In summary, the Mark Levinson N32 represents a culmination of state-of-the-art technology and meticulous engineering. With its balanced signal path, robust power supply, digital signal processing capabilities, and versatile connectivity options, it establishes itself as a prominent choice for those seeking unparalleled audio performance. Whether you are a casual listener or a dedicated audiophile, the N32 promises to elevate your music experience to new heights.
Top Page Image Contents