Mark Levinson N32 owner manual Important Safety Instructions

Page 3

Important Safety Instructions

Please read all instructions and precautions carefully and completely before operating your Mark Levinson® preamplifier.

1.ALWAYS disconnect your entire system from the AC mains before connecting or dis- connecting any cables, or when cleaning any component.

2.This product must be terminated with a three-conductor AC mains power cord which includes an earth ground connection. To prevent shock hazard, all three connections must ALWAYS be used.

3.AC extension cords are not recommended for use with this product.

4.NEVER use flammable or combustible chemicals for cleaning audio components.

5.NEVER operate this product with any covers removed.

6.NEVER wet the inside of this product with any liquid.

7.NEVER pour or spill liquids directly onto this unit.

8.NEVER block air flow through ventilation slots or heatsinks.

9.NEVER bypass any fuse.

10.NEVER replace any fuse with a value or type other than those specified.

11.NEVER attempt to repair this product. If a problem occurs, contact your Mark Levinson® retailer.

12.NEVER expose this product to extremely high or low temperatures.

13.NEVER operate this product in an explosive atmosphere.

14.ALWAYS keep electrical equipment out of the reach of children.

15.ALWAYS unplug sensitive electronic equipment during lightning storms.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Nº32 Reference Phono Modules Page Important Safety Instructions Page Table of Contents Special Design Features of the Nº32 Reference Preamplifier Ac regenerated power supply Fully balanced design Instrumentation amplifier topology Page Unpacking Operating Voltage Installing the Nº32 Reference Phono Preamplifier Modules Material needed Installation procedure Slide top cover back slightly then up and off Resulting in… This Not All four connections It would hinder your replacing the top cover, next Customizing Your Nº32 Configuring phono inputs Naming a phono input Setting the phono gain Setting line gain Setting the offset Page Setting the capacitive load Installing a Custom Load Page Loosen each gold thumb screw a few turns Be careful not to cross thread these relatively small screws Care and Maintenance Canadian Warranty Obtaining Service Input impedance SpecificationsInstallation Notes Madrigal Audio Laboratories

N32 specifications

The Mark Levinson N32 is a sophisticated audio preamplifier known for its exceptional performance and advanced technology. Designed for audiophiles and music enthusiasts, the N32 delivers a seamless integration of high-fidelity sound with a user-friendly interface, making it an ideal choice for any high-end audio system.

One of the standout features of the N32 is its innovative design. The preamp utilizes a fully balanced signal path that minimizes noise and distortion, ensuring that the music is delivered in its purest form. This balanced architecture is complemented by premium-quality components that are meticulously selected for their sonic properties. The N32 boasts a high signal-to-noise ratio, providing an expansive dynamic range that brings out the subtleties in music.

The N32 is equipped with a robust power supply that enhances performance by delivering stable voltage and current to the internal circuits. This power supply is specifically designed to handle the demands of high-resolution audio sources while reducing the likelihood of interference. As a result, users can expect clear, detailed sound reproduction that captures every nuance of the recording.

Another notable technology employed in the N32 is the use of digital signal processing (DSP). This allows for precise control over various audio parameters, enabling users to tailor their listening experience to personal preferences. With features such as adjustable gain, tone control, and digital filters, the N32 caters to a wide range of playback needs, ensuring optimal sound quality regardless of the audio source.

In terms of connectivity, the Mark Levinson N32 offers a versatile array of inputs and outputs. It supports various analog and digital formats, allowing users to connect a range of devices, from CD players to streaming services. The inclusion of both balanced XLR and unbalanced RCA inputs ensures compatibility with a broad spectrum of audio components.

Additionally, the N32 comes equipped with a refined user interface that enhances accessibility. The intuitive layout and clear display make it easy to navigate through settings and options, further enriching the overall user experience.

In summary, the Mark Levinson N32 represents a culmination of state-of-the-art technology and meticulous engineering. With its balanced signal path, robust power supply, digital signal processing capabilities, and versatile connectivity options, it establishes itself as a prominent choice for those seeking unparalleled audio performance. Whether you are a casual listener or a dedicated audiophile, the N32 promises to elevate your music experience to new heights.
Top Page Image Contents