Deutsche Telekom 400 quick start Setting up Your Windows NT/2000/XP Computer

To install TCP/IP:

a.In the Network window, click Add.

b.Select Protocol and then click Add.

c.Select Microsoft from the list of manufacturers.

d.Select TCP/IP from the list of network protocols and then click OK.

Configuring TCP/IP

1.In the Network window Configuration tab, select your network adapter’s TCP/IP entry and click Properties.

2.Click the IP Address tab. Click Obtain an IP address automatically.

3.Click the DNS Configuration tab. Select Disable DNS.

4.Click the Gateway tab. Highlight any installed gateways and click Remove until there are none listed.

5.Click OK to save and close the TCP/IP Properties window.

6.Click OK to close the Network window.

7.Turn on your Teledat Router 400 and restart your computer (if prompted). Insert the Windows CD if prompted.

Verifying TCP/IP Properties

1.Click Start and then Run. In the Run window, type ”winipcfg“ and then click OK to open the IP Configuration window.

2.Select your network adapter. You should see your computer’s IP address, subnet mask and default gateway.

Setting up Your Windows NT/2000/XP Computer

Configuring TCP/IP

1.Click Start, Settings, Network and Dial-up Connections and right-click Local Area Connection or the connection you want to configure and click Properties. For Windows XP, click Start, Control Panel, Network and Internet Connections and then Network Connections. Right-click the network connection you want to configure and then click Properties.

13