Datalogic Scanning DLL2020-WO user manual Serviceable parts inside, Exposure

Page 14

10

The DLL2020-WO

 

 

Optical

The use of optical instruments with this product will

 

increase eye hazard. Optical instruments include

 

binoculars, microscopes and magnifying glasses

 

but do not include eye glasses worn by the user.

Radiant Energy

The DLL2020-WO uses a low-power laser diode

 

operating at 650 nm in an opto-mechanical scanner

 

resulting in less than 0.7 mW peak output power.

 

Laser light observed at 15.0 cm (5.9 inch) above

 

the window through a 7 mm (0.28 in.) aperture and

 

averaged over 1000 seconds is less than 3.9 µW

 

per CDRH Class IIa specification. Do not attempt to

 

remove the protective housing of the scanner, as

 

unscanned laser light with a peak output up to 0.90

 

mW could be accessible inside.

Laser Light Viewer The scanner window is the only aperture through which laser light may be observed on this product. A failure of the scanner motor, while the laser diode continues to emit a laser beam, may cause emission levels to exceed those for safe operation. The scanner has safeguards to prevent this occurrence. If, however, a stationary laser beam is emitted, the failing scanner should be disconnected from its power source immediately.

Adjustments

Do not attempt to make any adjustments to or

 

alteration of this product. Do not remove the

 

scanner’s protective housing. There are no user-

 

serviceable parts inside.

CAUTION

Use of controls or adjustments or performan-

 

ce of procedures other than those specified

 

herein may result in hazardous laser light

 

exposure.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Datalogic DLL2020-WO Copyright 1998, Datalogic Table of contents Preface Chapter Unpacking the DLL2020-WO Good read buzzer Red LEDGreen LED Rubber sleeveScanning bar codes with the DLL2020-WO DLL2020-WO You can also hold the scanner without the handle Scanner labelling Laser safety English Finnish Serviceable parts inside ExposureMaintaining the scanner Controlling the scanner from the pos systemPOS system Installing the DLL2020-WO Installing the scanner Installing the DLL2020-WO RS232 direct powerKeyboard Wedge direct power RS232 non direct power Keyboard Wedge non direct power Open Programming Mode Return to RS232 Default Appendices Connector types and pin definitions Removing the RJ-48 connectorTechnical specifications ElectricalTroubleshooting SafetyProblem Diagnostic Tips Green LED stays on
Related manuals
Manual 30 pages 12.09 Kb

DLL2020-WO specifications

The Datalogic Scanning DLL2020-WO is a cutting-edge laser scanner designed to meet the demanding needs of retail, logistics, and warehouse environments. This device exemplifies the commitment to quality and efficiency that Datalogic is known for, offering robust functionality in a compact design.

One of the standout features of the DLL2020-WO is its exceptional scanning performance. Engineered with Datalogic's advanced laser scanning technology, this device can rapidly and accurately read a wide range of barcodes, including 1D and 2D formats. The scanner is optimized for high-speed applications, ensuring that checkout lines move quickly, and product scanning in warehouses is efficient and error-free.

The DLL2020-WO is built for versatility, making it appropriate for various applications. Retail environments benefit from its ability to handle multiple scanning tasks, from product recognition at the point of sale to inventory management and shelf replenishment. In logistics and warehouse settings, the scanner improves throughput by facilitating quick scan-and-go operations, ensuring fast processing times for shipping and receiving tasks.

Durability is another key characteristic of the Datalogic Scanning DLL2020-WO. It features a robust design that can withstand the rigors of daily use. With an IP54 rating, it is resistant to dust and water, making it suitable for various working conditions. Additionally, the scanner can endure drops from significant heights, reducing downtime due to damage and resulting in lower total cost of ownership.

The DLL2020-WO also incorporates Datalogic's innovative Green Spot technology, which provides a visual feedback system for successful barcode scans. This feature not only enhances user experience by offering an intuitive confirmation method but also helps to reduce operation errors. The scanner's ergonomic design ensures comfort during prolonged use, allowing operators to work efficiently without undue strain.

Furthermore, the DLL2020-WO supports multiple connectivity options, including USB and Bluetooth, enabling seamless integration into existing systems. This flexibility allows organizations to adapt the device to their specific technological environments, enhancing operational efficiency even further.

In conclusion, the Datalogic Scanning DLL2020-WO is an advanced scanning solution that combines high-performance with durability and versatility. With its robust build, advanced scanning capabilities, and user-friendly features, it is an ideal choice for businesses looking to enhance their scanning operations across various applications in retail and logistics sectors.
Top Page Image Contents