On indicates hub is receiving power | Compex Systems TP1016F

“Quick Install Guide”

♦Compex MicroHub®/6, 6-Port RJ-45

Ethernet Hub (TP1006C);

♦Compex MicroHub®/8, 8-Port RJ-45 + BNC

Ethernet Hub (TP1008C);

♦Compex MicroHub®/16, 16-Port RJ-45 +

BNC/AUI/Fiber Optic**

Ethernet Hub (TP1016C/ TP1016F**)

±Introduction

The Compex MicroHub®/8 (TP1008C); Compex MicroHub®/6 (TP1006C); and Compex MicroHub®/16; (TP1016C/ TP1016F) are multi-port Ethernet hubs that bring unmatched flexibility to LAN environments. There are multi-wiring connections for up to 6 (TP1006C); or 8 (TP1008C); or 16 (TP1016C/TP1016F) UTP ports. In addition, there is: a BNC (TP1008C); or a BNC/AUI (TP1016C); or a Fiber Optic (TP1016F) port for easy, direct connection to different LAN media segments. The TP1006C/TP1008C;/ TP1016C/TP1016F hubs constantly monitor each port for signal quality and will automatically disconnect a device producing noise or excessive collisions. The disconnected device will be reconnected automatically when the error condition is cleared.

±	Hub Features (see diagrams on inner cover)

•	Power LED		♦ ON indicates hub is receiving power.

‚	Collision LED		♦ BLINKS to indicate collision of transmitted
			packets occuring.
ƒ	Link/Activity LED		♦ STEADY LIGHT indicates a good cable link
	(TP1006C/TP1008C/TP1016C/		between adapter and hub;
	TP1016F)		♦ BLINKS to indicate network activity present.
„	Jabber LED		♦ BLINKS to indicate transmission of packet/s
	(TP1016C/TP1016F)		exceeding the specified time.
…	Uplink Button (TP1016C):		♦ Uplink mode when button is released OUT.
		(TP1006C/TP1008C):	♦ Uplink mode (button shift Left).
†	6	RJ-45 Ports (TP1006C) ;	♦ Configurable as 6; /8; / 16 UTP ports or 5; /7; /
	8	RJ-45 Ports (TP1008C) or	15 UTP ports plus 1 UTP Uplink Port (Port #1).
	16 RJ-45 Ports (TP1016C/F)
‡	1 BNC;/ 1 BNC-1AUI;/		♦ BNC or AUI or Fiber Optic for connection to a
	1 BNC-1Fiber Optic Port;		different LAN media segment.
ˆ	DC Power Socket		♦ Jack for connection to an external Output
	(TP1006C/TP1008C);/		Power adapter (DC 7.5V @ 1 Amp);
	AC Power Socket		♦ Flexible power input (range 90VAC to
	(TP1016C/ TP1016F)		250VAC) meets every country requirement.
‰	ON/OFF Power Switch		♦ Provides a convenient means to power-up or
	(TP1016C/TP1016F)		shutdown the hub.

English Compex MicroHub®/6 (TP1006C);1

Compex MicroHub®/8 (TP1008C);

Compex MicroHub®/16 (TP1016C/ TP1016F)

“Quick Install Guide”

Hub Features (see diagrams on inner cover)

♦ ON indicates hub is receiving power.

♦ BLINKS to indicate collision of transmitted

packets occuring.

Link/Activity LED

♦ STEADY LIGHT indicates a good cable link

between adapter and hub;

♦ BLINKS to indicate network activity present.

♦ BLINKS to indicate transmission of packet/s

exceeding the specified time.

Uplink Button (TP1016C):

♦ Uplink mode when button is released OUT.

♦ Uplink mode (button shift Left).

♦ Configurable as 6; /8; / 16 UTP ports or 5; /7; /

♦ Jack for connection to an external Output

Power adapter (DC 7.5V @ 1 Amp);

♦ Flexible power input (range 90VAC to

250VAC) meets every country requirement.

♦ Provides a convenient means to power-up or

shutdown the hub.