Advanced Setup CBI/CGI Technical Reference
Chassis Plans5-4
The Setup screen displays the system option:
Try Other Boot Devices Yes
Available options are:
No
Yes
Initialize I2O Devices
If this option is set to Yes , AMIBIOS initializes any attached I2O devices (processors or
storage devices).
The Setup screen displays the system option:
Initialize I2O Devices Yes
Available options are:
No
Yes
Display Mode At Add-On ROM Init
This option specifies the system display mode which is set at the time the AMIBIOS post
routines initialize an optional option ROM.
The Setup screen displays the system option:
Display Mode at Add-On ROM Init Force BIOS
Two options are available:
Select Force BIOS to use the display mode currently being used by
AMIBIOS.
Select Keep Current to use the current display mode.
Floppy Access Control
This option specifies the read/write access which is set when booting from a floppy
drive. This option is effective only if the device is accessed through the BIOS.
The Setup screen displays the system option:
Floppy Access Control Read-Write
Available options are:
Read-Write
Read-Only