System BIOS CBI/CGI Technical Reference
Chassis Plans3-6
AMIBIOS SETUP
UTILITY MAIN
MENU
When you press <F1> in response to an error message received during the POST
routines or when you press the <Del> key to enter the AMIBIOS Setup Utility, the
following screen displays:
AMIBIOS Setup Main Menu
When the AMIBIOS Setup Main Menu screen displays, you may continue to subscreens
designed to change parameters for each of the AMIBIOS Setup areas. Use the Down
Arrow key to highlight the desired option and press <Enter> to proceed to the appro-
priate subscreen.
AMIBIOS SETUP
UTILITY OPTIONS
The AMIBIOS Setup Utility allows you to change system parameters to tailor your
system to your requirements. Various options which may be changed are listed below.
Further explanations of these options and available values may be found in later chapters
of this manual, as noted below.
_______________________________________________________________________
NOTE: Do not change the values for any option unless you understand the impact on
system operation. Depending on your system configuration, selection of other values
may cause unreliable system operation.
_______________________________________________________________________
Use the Down Arrow key to select the desired option. The following Setup areas are
available for modification:
Select Standard CMOS Setup to make changes to Standard CMOS Setup
parameters as described in the Standard CMOS Setup chapter of this
manual. The following options may be modified:
Date/Time
Floppy Drive A:/Floppy Drive B: Types
AMIBIOS HIFLEX SETUP UTILITY - VERSION X.XX
(C)1998 American Megatrends, Inc. All Rights Reserved
Standard CMOS Setup
Advanced CMOS Setup
Advanced Chipset Setup
Power Management Setup
PCI / Plug and Play Setup
Peripheral Setup
Auto-Detect Hard Disks
Change User Password
Change Supervisor Password
Auto Configuration with Optimal Settings
Auto Configuration with Fail Safe Settings
Save Settings and Exit
Exit Without Saving
Standard CMOS Setup for changing time, date, hard disk type, etc.
ESC:Exit ↑↓:Sel F2/F3:Color F10:Save & Exit