Power Management SetupCBI/CGI Technical Reference
Chassis Plans. 6-5
Suspend Time Out
This option specifies the length of the period of system inactivity when the computer is
already in Standby mode before it is placed in Suspend mode. In Suspend mode, nearly
all power use is curtailed.
The default for this option depends on the value selected in the Standby/Suspend Timer
Unit option.
The Setup screen displays the system option:
Suspend Time Out Disabled
Available options are:
Disabled
32 through 4064, in increments of 32 (if the Standby/Suspend
Timer Unit option is set to 32 secs)
4 through 508, in increments of 4 (if the Standby/Suspend
Timer Unit option is set to 4 msec, 4 min or 4 sec)
Slow Clock Ratio
This option specifies the speed at which the system clock runs when the system is in
Standby power saving mode. The settings are expressed as a percentage between the
normal processor clock speed and the processor clock speed when the system is in the
power-conserving state.
The Setup screen displays the system option:
Slow Clock Ratio 50%-62.5%
Available options are:
0-12.5%
12.5%-25%
25%-37.5%
37.5%-50%
50%-62.5%
62.5%-75%
75%-87.5%
Display Activity
This option enables event monitoring on the video display. If the option is set to
Monitor and the computer is in a power-saving mode, AMIBIOS watches for display
activity. If any activity occurs, the computer enters the full power-on mode and
AMIBIOS restarts the Standby and Suspend time-out timers.
The Setup screen displays the system option:
Display Activity Ignore