CBI/CGI Technical Reference
Chassis PlansC-4
CONFIGURE/VIEW
HOST ADAPTER
SETTINGS
The Configure/View Host Adapter option displays the current settings for the SCSI bus
interface and allows you to change these settings.
When you select this option from the Options Menu, a screen similar to the following
displays:
Configure/View Host Adapter Settings Screen
The SCSI bus interface definitions displayed on this screen are described in the
following pages. For additional options, you may:
Select Boot Device Options to display and/or change boot device settings.
Select SCSI Device Configuration to display and/or change the individual
settings for the devices attached to the host adapter.
Select Advanced Configuration Options to display and/or change the
advanced configuration settings for the host adapter.
Host Adapter SCSI ID
Each device on the SCSI bus, including the adapter, must have a unique SCSI ID.
Allowable IDs are 0 through 7 on 8-bit adapters, and 0 through 15 on 16-bit adapters.
The SCSI ID serves two purposes:
1) It uniquely defines each SCSI device on the bus.
2) It determines which device controls the bus when two or more devices try to
use the bus at the same time. For 8-bit devices, SCSI ID 7 has the highest
Adaptec AIC7880 Ultra/Ultra W < SCSISelect(TM) > Utility vX.XX
SCSI Bus Interface Definitions
Host Adapter SCSI ID................... 7
SCSI Parity Checking................... Enabled
Host Adapter SCSI Termination.......... Low ON/High ON
Additional Options
Boot Device Options.................... Press <Enter>
SCSI Device Configuration.............. Press <Enter>
Advanced Configuration Options......... Press <Enter>
<F6> - Reset to Host Adapter Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
(*=default)
AIC-7880 Ultra/Ultra W at Bus:Device XX:XXh
Configuration