CBI/CGI Technical Reference
Chassis Plans v
HANDLING
PRECAUTIONS
_______________________________________________________________________
WAR N I N G: This product has components which may be damaged by electrostatic
discharge.
_______________________________________________________________________
To protect your single board computer (SBC) from electrostatic damage, be sure to
observe the following precautions when handling or storing the board:
Keep the SBC in its static-shielded bag until you are ready to perform your
installation.
Handle the SBC by its edges.
Do not touch the I/O connector pins. Do not apply pressure or attach labels
to the SBC.
Use a grounded wrist strap at your workstation or ground yourself
frequently by touching the metal chassis of the system before handling any
components. The system must be plugged into an outlet that is connected to
an earth ground.
Use antistatic padding on all work surfaces.
Avoid static-inducing carpeted areas.
SOLDER-SIDE
COMPONENTS
This SBC has components on both sides of the PCB. It is important for you to observe
the following precautions when handling or storing the board to prevent solder-side
components from being damaged or broken off:
Handle the board only by its edges.
Store the board in padded shipping material or in an anti-static board rack.
Do not place an unprotected board on a flat surface.