Standard CMOS SetupCBI/CGI Technical Reference
Chassis Plans 4-1
Chapter 4 Standard CMOS SetupSTANDARD CMOS
SETUP
When you select Standard CMOS Setup from the AMIBIOS Setup Utility Main Menu,
the following Setup screen displays:
Standard CMOS Setup Screen
When you display the Standard CMOS Setup screen, the format is similar to the sample
shown above. If values display for all parameters, the Setup parameters have been
defined previously. The available values for each option are displayed at the bottom of
the screen when you tab or arrow into the field.
_______________________________________________________________________
NOTE: The values on this screen do not necessarily reflect the values appropriate for
your SBC. Refer to the explanations below for specific instructions about entering
correct information.
_______________________________________________________________________
STANDARD CMOS
SETUP OPTIONS
The descriptions for the system options listed below show the values as they appear if
you have not yet run Standard CMOS Setup. Once values have been defined, they
display each time Standard CMOS Setup is run.
Date
The Setup screen displays the system option:
Date (mm/dd/yyyy): Mon Jan 01, 1996
AMIBIOS SETUP - STANDARD CMOS SETUP
(C)1998 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yyyy): Mon Jan 01, 1996 Base Memory: 640 KB
Time (hh/mm/ss): 12:30:00 Extd Memory: 14 MB
Floppy Drive A: 1.44 MB 3-1/2
Floppy Drive B: Not Installed
LBA Blk PIO 32Bit
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode
Pri Master : Auto Off
Pri Slave : Auto Off
Sec Master : Auto Off
Sec Slave : Auto Off
Boot Sector Virus Protection Disabled
Month: Jan - Dec ESC:Exit ↑↓:Sel
Day: 01 - 31 PgUp/PgDn:Modify
Year: 1901 - 2099 F2/F3:Color