Panasonic DMC-LC50GN Setting the Date/Time Clock Set, Initial setting, Set date, time and order

Preparation

Setting the Date/Time (Clock Set)

ªInitial setting

The clock is not set when the camera is shipped. When you turn the camera on, the clock setting screen appears.

PLEASE SET THE CLOCK

CLOCK SET MENU

When pressing the [MENU] button, the screen shown in step 2 appears. Set the clock on it.

1Select [CLOCK SET] from the [SETUP] menu. (P20)

		REC	SETUP 2/3
		NO.RESET
		RESET
		CLOCK SET
	USB MODE
USB				Mass Storage

SELECT SET EXIT MENU

WB

WBWB

2Set date, time and order.

CLOCK SET

10 :00 11. MAR . 2004

D/M/Y

SELECT SET EXIT MENU

WB WB

•2/1: Select the desired item.

•3/4: Set date and time.

•3/4: Select [D/M/Y], [M/D/Y] or [Y/M/D].

•Close the menu by pressing the [MENU] button 2 times after finishing the setting.

•Check if the clock setting is correct, after turning the camera off and on.

•You can set the year from 2000 to 2099. The 24-hour system is used.

ªDate Printing

•You can set the date printing in DPOF print setting on this camera. (P68)

•Using the supplied software, [SD Viewer for DSC], it is possible to have the date imprinted on the picture. For details, please read the supplied operating instructions for PC connection.

•When you go to a photo studio for printing, be sure to order the printing of the date. For further information, ask the photo studio. Depending on the studio, it may not be possible to print the date.

19