CBI/CGI Technical Reference
Chassis Plans A-11
PORT 80 CODES
(CONTINUED)Code Description
96
97
98
99
9A
9B
9C
9D
9E
A2
A3
A4
A5
A7
A8
A9
AA
AB
B0
B1
00
Initializing before passing control to adapter ROM at C800.
Initialization before C800 adapter ROM gains control completed. Adapter ROM
check next.
Adapter ROM had control and has returned control to BIOS POST. Performing any
required processing after option ROM returned control.
Any initialization required after option ROM test has completed. Configuring timer
data area and printer base address next.
Set timer and printer base addresses. Setting RS-232 base address next.
Returned after setting RS-232 base address. Performing any required initialization
before coprocessor test next.
Required initialization before coprocessor test is over. Initializing coprocessor next.
Coprocessor initialized. Performing any required initialization after coprocessor test
next.
Initialization after coprocessor test is complete. Checking extended keyboard,
keyboard ID and Num-Lock key next. Issuing keyboard ID command next.
Displaying any soft errors next.
Soft error display complete. Setting keyboard typematic rate next.
Keyboard typematic rate set. Programming memory wait states next.
Memory wait state programming over. Clearing screen and enabling parity and NMI
next.
NMI and parity enabled. Performing any initialization required before passing control
to adapter ROM at E000H next.
Initialization before passing control to adapter ROM at E000H completed. Passing
control to adapter ROM at E000H next.
Returned from E000 ROM control. Going to do any initialization required after E000
option ROM control.
Initialization after E000H option ROM control completed. Displaying system configu-
ration next.
Uncompressing DMI data and executing DMI POST initialization next.
System configuration is displayed.
Copying any code to specific areas.
Copying of code to specific areas done. Passing control to INT 19H boot loader next.