Fujitsu MBA3073NP, MBA3073NC, MBA3300NP manual Sense data 3-0C-03, 4-32-00, 4-40-xx, and 4-C4-xx

7.2.2Sense data (3-0C-03), (4-32-00), (4-40-xx), and (4-C4-xx)

Sense data (3-0C-03), (4-32-00), (4-40-xx), and (4-C4-xx) indicate one of the following:

•A target sector could not be detected using the sector counter.

•A seek process overran the specified time.

•A write to a disk terminated abnormally.

•Failed to allocate the alternate block in the alternate processing.

•An error occurred in power-on self-diagnosis.

•An HDD error occurred.

The symptoms above are generally caused by an error in the PCBA or the DE.

7.2.3Sense data (1-1x-xx), (3-1x-xx) and (E-1D-00): Disk read error

If sense data (1-1x-xx), (3-1x-xx) or (E-1D-00) occurs frequently in a specific block of a disk, there is disk damage that was not recorded in the media defect list. In this case, assign an alternate block to the error-detected block using a REASSIGN BLOCKS command. For an explanation of the REASSIGN BLOCKS command, refer to Subsection 3.3.2 “REASSIGN BLOCKS (07)” of the SCSI Logical Interface Specifications.

If this error occurs in different blocks, the PCBA or the DE is faulty.

7.2.4Sense data (4-44-xx), (5-2x-xx), (5-90-00), (B-44-xx), (B-47-xx), (B-48-00), (B-49-00), (B-4D-xx) and (B-4E-00): SCSI interface error

Sense data (5-2x-xx), (5-90-00), (B-44-xx), (B-47-xx), (B-48-xx), (B-49-00), (B-4D-xx) and (B-4E-00) indicates one of the following symptoms:

•An invalid or unsupported command was issued, or invalid or unsupported parameters were specified.

•A SCSI interface error occurred.

•A hardware error occurred inside the HDD.

•A parity error occurred in the SCSI bus.

If this error occurs, the PCBA or the SCSI interface cable is faulty.

116 C141-E270