| TABLES |
|
|
| page |
Table 2.1 | Model names and order numbers | 21 |
Table 2.2 | Function specifications | 22 |
Table 2.2 | Function specifications (continued) | 23 |
Table 2.3 | Environmental/power requirements | 25 |
Table 2.3 | Environmental/power requirements (continued) | 26 |
Table 2.4 | SCSI function specifications | 29 |
Table 3.1 | Format capacity | 38 |
Table 4.1 | Surface temperature check point | 52 |
Table 4.2 | Recommended components for connection | 67 |
Table 5.1 | SCSI ID setting | 77 |
Table 5.2 | Setting SCSI terminator power supply (NP model) | 78 |
Table 5.3 | Motor start mode setting | 78 |
Table 5.4 | Write protect setting (NP model) | 79 |
Table 5.5 | Setting of the SCSI interface operation mode (NP model) | 79 |
Table 5.6 | Setting the bus width of the SCSI interface (NP model) | 79 |
Table 5.7 | Default mode settings (by CHANGE DEFINITION command) | 80 |
Table 5.8 | Setting check list (NP model only) | 81 |
Table 6.1 | 95 | |
Table 6.2 | 106 | |
Table 6.3 | HDD troubleshooting | 107 |
Table 7.1 | Definition of sense data | 115 |
Table A.1 | CN2 setting terminal (on NP model drives only) | 118 |
Table B.1 | SCSI connector (SCA2 type LVD | 120 |
Table B.2 | SCSI connector | 121 |
12 |
