Fujitsu MBA3147NC, MBA3073NP, MBA3073NC, MBA3300NP, MBA3300NC, MBA3147NP manual Function specifications

Table 2.2 Function specifications (continued)

			Specification
Item
	MBA3300NC		MBA3147NC	MBA3073NC
	MBA3300NP		MBA3147NP	MBA3073NP
Related standards	SPI-4 (T10/1365D Rev. 10), SAM-2 (T10/1157D Rev. 24),
	SPC-2 (T10/1236D Rev. 20), SBC (T10/996D Rev. 8c)
Data buffer		8 MB FIFO ring buffer (*12)
Acoustic noise (Idle)			3.6 Bels typ.

(*1) The formatted capacity can be changed by changing the logical block length and using spare sector space. See Chapter 3 for the further information. The formatted capacity listed in the table is an estimate for 512 bytes per sector.

(*2) One gigabyte (GB) = one billion bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting.

(*3) The seek time is as follows:

Seek time [ms]

Seek difference [4096 Cyl/div]

(*4) The start time is the time from power on or start command to when the HDD is ready, and the stop time is the time for disks to completely stop from power off or stop command.

(*5) This value indicates during idle mode. Power supply at nominal voltage ± 1%. 25°C ambient.

(*6) Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.

(*7) 5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.

(*8) 1 on 1 connection case.

(*9) 1 host, 15 devices case.

C141-E270 23