Fujitsu MBA3147NC, MBA3073NP, MBA3073NC, MBA3300NP, MBA3300NC 14 SCA2 type 16-bit Scsi connector

(2)SCSI connector and power supply connector

The connector for the SCSI bus is an unshielded SCA-2 connector conforming to SCSI-3 type which has two 40-pin rows spaced 1.27 mm (0.05 inch) apart. The power connector is included in the SCSI connector.

Figure 4.14 shows the SCSI connector. See Section B.1 in Appendix B for signal assignments on the connector.

For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 “Physical Requirements” and Section 1.4 “Electrical Requirements” of the SCSI Physical Interface Specifications.

Figure 4.14 SCA2 type 16-bit SCSI connector

(3)Connector for external operator panel

This connector is not available for NC model drives.

C141-E270 59