IMPORTANT
When Write cache is enabled, you should ensure that the cached data is surely flushed to the disk media before you turn off the HDD's power.
To ensure it, you should issue either the SYNCHRONIZE CACHE command or the STOP UNIT command with specifying “0” to the Immediate bit and then confirm that the command is surely terminated with the GOOD STATUS.
(9)Command queuing feature
The HDD can queue maximum 128 commands, and optimizes the issuing order of queued commands by the reordering function. This feature realizes the high speed processing.
(10)Reserve and release functions
The HDD can be accessed exclusively in the
(11)Error recovery
The HDD can try to recover from errors in SCSI bus or the HDD using its powerful retry processing. If a recoverable data check occurs,
(12)Automatic alternate block reassignment
If a defective data block is detected during read or write the HDD can automatically reassign its alternate data block.
(13)Programmable data block length
Data can be accessed in
IMPORTANT
Error rate increase
1.The HDD format at factory shipment is generally 512 byte.
2.The Recoverable Error of the drive might increase when the format would be modified from 512 bytes to the following values: 516 bytes, 520 bytes, 524 bytes, and 528 bytes.
3.The Recoverable Error referred in 2) is sense data
16 |
|
