24xx
Irrecoverable Operator Errors
Paper Out and Font lights blink. If this indication occurs, the problem may be with the paper present sensor or the paper select sensor. Check the following in the order listed and if the printer does not work correctly, go to the indicated service check.
Paper Present Sensor
Action | Check | |
|
| |
Remove all paper | Paper Out blinks when paper does not exist. | |
from the printer. | Paper Out turns off when paper exists. | |
Turn the power on. | ||
Go to “Paper Present Sensor Service Check” | ||
| ||
| on page | |
|
| |
Paper Select Sensor |
| |
|
| |
Action | Check | |
|
| |
Turn the power off. | Load/Unload function correctly. | |
Install the Push | Go to “Paper Select Sensor Service Check” on | |
Tractor. | page | |
Set the paper select |
| |
lever to the tractor |
| |
position and load |
| |
continuous forms. |
| |
Turn the power on. |
| |
|
| |
Remove the | When Auto Ready Cut Sheet is enabled, paper | |
continuous forms. | feeds automatically. | |
Set the paper select | When Auto Ready Cut Sheet is disabled, press | |
lever to the cut sheet | FormFeed to load a cut sheet. | |
position and insert a | Verify Load/Unload does not function. | |
cut sheet. | Go to “Paper Select Sensor Service Check” on | |
| ||
| page | |
|
|