Oki 2400 manual 24xx

24xx

9.Remove the two screws [A] securing the platen to the side frames.

10.Remove the carrier motor bracket. Go to “Carrier, Motor Assembly Removal” on page 4-21.

11.Remove the five screws securing the left side frame and remove the frame.

12.Remove the four screws from the right side frame and remove the bottom frame assembly.

13.Remove the five screws from the frame support plate and remove the lower feed roller.

14.Be sure to perform the Printhead-to-Platen Gap Adjustment procedure. Go to “Printhead-to-Platen Gap Adjustment” on page 4-2.

4-42Service Manual