24xx
3 Beeps and Tractor 2 LED blinks 3 times
Tractor 2 selected from operator panel but printer does not detect Tractor 2 or detects that the Tractor 2 mechanism is not installed.
| FRU | Action |
|
|
|
1 | Tractor 2 | Check the Tractor 2 |
| Board/Cable Asm. | cable connection. |
|
| The |
|
| the Tractor 2 cover and rests on the printer |
|
| cover when Tractor 2 is installed. |
|
| Remove the Tractor 2 cover and be sure the in- |
|
| place sensor opens when the Tractor 2 is |
|
| installed. The voltage at Tractor 2 |
|
| should be +5 V dc with the sensor open and 0 |
|
| with it closed. |
|
| Replace the Tractor 2 board/cable assembly if |
|
| the sensor signal is wrong. |
|
| For information on the Tractor 2 cable |
|
| connectors, see “Tractor 2 Cable |
|
| Connectors” on page |
|
|
|
2 | Logic Board | Check the cable connection from Tractor 2 to |
|
| the printer. |
|
| If possible, try the Tractor 2 with another printer |
|
| to determine if the problem is the Tractor 2 |
|
| board/cable assembly or the printer logic |
|
| board. |
|
|
|
Diagnostic Information
