Unit 4: Printer Configuration
4.4.6 Program Download Mode (DSW1=ON, DSW2=OFF, DSW3=ON + POWER ON)
In this mode, the printer is set to receive an application program from the host computer to download into its memory. Remember to set the printer to the correct active interface to be used for the data transfer. The status of various indicators in this mode is summarized below:
Function | ONLINE | ERROR | BUZZER | LED | |
Display | |||||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
During download mode | ON | OFF | 1 beep | 1 | |
|
|
|
|
| |
Wait to receive data | ON | OFF | - | 1 | |
|
|
|
|
| |
During data transfer | ON | OFF | 1 beep | 2 | |
(start of data transfer) |
|
|
|
| |
|
|
|
|
| |
Data editing | ON | OFF | - | 3 | |
|
|
|
|
| |
Flash ROM clear | ON | OFF | - | 4 | |
|
|
|
|
| |
Writing to Flash ROM | ON | OFF | - | 5 | |
|
|
|
|
| |
Download completed | ON | OFF | 3 long beeps | 1 | |
|
|
|
|
| |
Download error | Blinking | Blinking | 1 long beep | F | |
|
|
|
|
|
•To exit this mode, make sure the printer is waiting to receive data (ONLINE LED=ON, ERROR LED=OFF, LED Displays “1”, No Buzzer beep) and not performing any data transfer.
•Restart the printer after completion of the download, and perform a factory test print.
4.4.7 Font Download Mode (DSW1=OFF, DSW2=ON, DSW3=ON + POWER ON)
In this mode, the printer is set to download fronts from the host computer. Remember to set the printer to the correct active interface to be used for the data transfer. The status of various indicators in this mode is summarized below:
Function | ONLINE | ERROR | BUZZER | LED | |
Display | |||||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
During download mode | ON | OFF | 1 beep | 1 | |
|
|
|
|
| |
Wait to receive data | ON | OFF | - | 1 | |
|
|
|
|
| |
During data transfer | ON | OFF | 1 beep | 2 | |
(start of data transfer) |
|
|
|
| |
|
|
|
|
| |
Writing font data | ON | OFF | - | 3 | |
|
|
|
|
| |
Writing font information | ON | OFF | - | 4 | |
|
|
|
|
| |
Download completed | ON | OFF | 1 beep | 5 | |
|
|
|
|
| |
Download error | ON | ON | 3 beeps | F | |
|
|
|
|
|
•To exit this mode, make sure the printer is waiting to receive data (ONLINE LED=ON, ERROR LED=OFF, LED Displays “1”, No Buzzer beep) and not performing any data transfer.
CT4i Series Operator Manual |
