CBI/CGI Technical Reference
Chassis PlansC-12
ADVANCED
CONFIGURATION
OPTIONS
When you select Advanced Configuration Options from the Configure/View Host
Adapter Settings Menu, the following screen displays:
Advanced Configuration Options Screen
The Advanced Configuration Options screen displays the current settings for the selected
adapter and allows you to change these settings.
Plug and Play Scam Support
When this option is set to Enabled, it allows the adapter to automatically assign a SCSI
ID to an attached SCSI device that supports SCAM-1 (SCSI Configured AutoMatically)
protocol. Most non-SCAM devices tolerate SCAM protocol, so you can usually enable
this option even if you have some non-SCAM devices. In rare cases, an old SCSI-1
device may not tolerate SCAM and may cause your computer to hang or operate errati-
cally. If this happens, set the option back to Disabled.
The default for this option is Disabled. When you attempt to change it to Enabled, the
following informational message displays:
Available options are:
Enabled
Disabled
Adaptec AIC7880 Ultra/Ultra W < SCSISelect(TM) > Utility vX.XX
Plug and Play Scam Support.............................. Disabled
Reset SCSI Bus at IC Initialization..................... Enabled
_____ Options Listed Below Have NO EFFECT if the BIOS is Disabled _____
Host Adapter BIOS (Config. Utility Reserves BIOS space). Enabled
Support Removable Disks Under BIOS as Fixed Disks....... Boot Only
Extended BIOS Translation for DOS Drives > 1 GByte...... Enabled
Display <Ctrl-A> Message During BIOS Initialization..... Enabled
Multiple LUN Support.................................... Disabled
BIOS Support for Bootable CD-ROM........................ Enabled
BIOS Support for Int13 Extensions....................... Enabled
Support for Ultra SCSI Speed............................ Disabled
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
(*=default)
WARNING: ‘Reset SCSI Bus at IC Initialization’ cannot be DISABLED
if ‘Plug and Play Scam Support’ is ENABLED.
(Compliant to Scan Protocol)
AIC-7880 Ultra/Ultra W at Bus:Device XX:XXh
Advanced Configuration Options