Specifications CBI/CGI Technical Reference
Chassis Plans1-12
BATTERY A built-in lithium battery is provided, for ten years of data retention for CMOS memory.
______________________________________________________________________
CAUTION: There is a danger of explosion if the battery is incorrectly replaced.
Replace it only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
______________________________________________________________________
POWER
REQUIREMENTS
The following are typical values:
TEMPERATURE/
ENVIRONMENT
Operating Temperature: 0º C. to 60º C.
0º C. to 55º C. for 700MHz Intel® Pentium® III and above
Storage Temperature: - 40º C. to 70º C.
Humidity: 5% to 90% non-condensing
MEAN TIME
BETWEEN
FAILURES (MTBF)
CBI/CGI:
66,000 POH (Power-On Hours) at 40° C., per MIL-HDBK-217F
CB BASIC:
95,000 POH (Power-On Hours) at 40° C., per MIL-HDBK-217F
UL RECOGNITION This SBC is a UL recognized product listed in file #E208896.
This board was investigated and determined to be in compliance under the Bi-National
Standard for Information Technology Equipment. This included the Electrical Business
Equipment, UL 1950, Third Edition, and CAN/CSA C22.22 No. 950-95.
Processor
Speed +5V * +12V -12V
Intel® Pentium® III -100MHz FSB:
850MHz
800MHz
7.6 Amps
7.1 Amps
< 100 mAmps
< 100 mAmps
< 100 mAmps
< 100 mAmps
Intel® Celeron® - 66MHz FSB:
733MHz
667MHz
633MHz
6.5 Amps
6.1 Amps
5.6 Amps
< 100 mAmps
< 100 mAmps
< 100 mAmps
< 100 mAmps
< 100 mAmps
< 100 mAmps