Clarion VMA1891 owner manual OSD Functions, Adjust

				OWNERÕS MANUAL
OSD FUNCTIONS AND OPERATIONS:
Icons	Sub Menus		Function	Operation
Auto	1) All		Auto Sets all functions	Use UP/DN buttons to select the appropriate
Adjust	2) Auto Position		Auto Screen Position	Sub Menu. Press the OSD display button to
	3) Auto Phase		Auto Phase settings	activate the automatic function. Select Exit,
	4)	Exit	Exits and Auto Saves	then press the OSD button to exit the function
Input	1)	RGB	Input for PC	Use UP/DN buttons to select the appropriate
Source	2) Video (RCA)		Input for Composite Video	Sub Menu. Press the OSD display button to
	3)	S-Video	Input for High quality	enter the input type. If no signal is present,
			video (such as DVD)	an error message will appear.
Display	1)	Normal	Normal 4/3 Mode	Use UP/DN buttons to select any adjustment
Size	2)	Expand	Widescreen mode 16/9	Sub Menu. Press the OSD display button to
	3)	Full	Fills the height and width	save choice. Use UP/DN buttons to scroll to
			of the screen	Exit in Main Menu. Press OSD button to exit
Language	1)	English	Changes the OSD menu to	Use the UP/DN buttons to select the
	2)	German	the user’s preferred	appropriate language. Press the OSD display
	3)	French	language.	button again to save the language and exit to
	4)	Italian		the Main Menu.
	5)	Spanish
OSD	1)	OSD Timeout	15, 30, 45, 60 seconds	Use UP/DN buttons to select the appropriate
Control	2)	OSD Position	Hor. or Ver. Position	Sub Menu. Press the OSD display button to
	3)	OSD Color	Blue, Green, Cyan, Ma-	enter the Sub Menu. Use the UP/DN button
			genta, None	to scroll through the adjustment choices.
	4)	Exit	Exits and Auto Saves	Press the OSD display button to save the
				adjustment. Select Exit and press the OSD
				display button to exit to the Main Menu.
Exit	None		Saves and Exits Main	Use UP/DN buttons to select the Exit
			Menu. If OSD Timeout is	function. Press the OSD display button again
			activated, the menu will	to exit the Main Menu.
			disappear after timeout.

TILTING THE MONITOR:

Gently hold the top and bottom of the monitor panel and tilt the monitor forward or backwards to achieve the desired viewing angle. Maximum tilt angle is 10° forward and up to 45° backwards.

CARE AND MAINTENANCE:

Cleaning the cabinet:

•Use a soft, dry cloth and gently wipe off any dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth.

•Do not use liquid cleaners on any surfaces as they may damage the cabinet or cause the paint to peel. Also leaving rubber or plastic products in contact with the cabinet for long periods of time may cause stains.

Cleaning the LCD Panel

•The LCD panel tends to collect dust, so wipe it off occasionally with a soft dry cloth. The surface is easily scratched; so wipe with gentle light strokes.

•Do not use any type of hard objects to clean the surface. Damage may occur.

OSD Functions

5