Furuno MU-155C manual Choosing Source for Main Picture, Disp selection window

4.3 Choosing Source for Main Picture

Choose the signal to display on the entire screen as follows:

1.Press the [DISP] key to show the DISP selection window.

Signal names can be changed. For detail, see “3.3.2 Changing the signal name”.

RGB1

RGB2

DVI

VIDEO1

VIDEO2

VIDEO3

DISP selection window

2.Press the [▲] or [▼] key to select a signal.

You can also select the signal by pressing the [DISP] key continuously.

RGB1-2: The signal from the chosen RGB port is displayed on the entire screen.

DVI: The signal from the DVI port is displayed on the entire screen.

VIDEO1-3: The external video from the appropriate VIDEO port is displayed on the entire screen.

3.Press the [◄] or [►] key to close the window.

The window is erased when there is no operation within five seconds.

Note: The name of the selected signal appears at the right top corner for five seconds after the DISP selection window is erased.

16