Furuno MU-155C manual Flush mounting, Mounting dimensions

Flush mounting

See the outline drawing at the end of this manual for mounting dimensions.

CAUTION

Hold the hard cover and display unit together when lifting the display unit.

The display unit may fall out if only the hard cover is held.

1.Remove the hard cover from the unit.

2.Using the paper template supplied in the installation materials, make a cutout in the mounting location.

3.Set the display unit to the cutout, and fasten it with four self-tapping screws (5X40, supplied as accessories).

Note: Hex head bolts may also be used to fasten the display unit. However, their lengths must be 10 mm longer than the wall thickness.

30

Cosmetic cap

130

Waterproofing: IP20

Minimum: 50

Waterproofing: IPX5

Mounting dimensions

4.Attach the cosmetic caps (supplied as accessories) to the display unit at the locations shown in the drawing above.

5.Attach hard cover to protect the LCD.

2