Instruction: Depending on your service provider the KTA may display “gk zone” instead of “service address”.
Notice: If login failed, contact your service carrier to adjust parameters. Do not ajust default value in most cases.
¾Audio Settings
Audio codec
Ringtype
Voice active | auto gain | auto echo |
detection | control | cancellatio |
Notice: All above audio parameters are default settings. Contact your operator to adjust the corresponding parameters if any problems.Please do not adjust these without the advice of your service provider.
¾Other Settings
adjust the login passport | IP address of network |
1234 is default value | time server |
Use Digitmap: Please leave this function turned on. The Digit map enables the KTA to recognize dialing sequences from around the world. If the user dials a recognized dialing sequence then the KTA initiates the call without the user having to press the # key after dialing.
Notice: Enter #358# to restore factory(default value) if forget KTA login password. Pasword will restore to the default value, 1234.
8