Connect Tech Xtreme/104-Express User Manual
Hardware Installation
Installing the Xtreme/104-Express into your system
1.Turn off the power to your PCI/104-Express system and open any relevant enclosure to gain access to the stack (consult your system’s documentation for more information on this procedure).
2.Mount the Xtreme/104-Express into an available PCI Express slot.
NOTE: Ensure that all PCI/104-Express cards are within 6 cards from the CPU and are stacked closest to the CPU. PCI/104-Express cards must stack in only one direction, either on top of or below the CPU, and there must be no more than six PCI/104-Express cards installed in a given stack without specialized extender circuitry.
The Xtreme/104-Express provides support for Windows 2000/XP/XP x64/XPe/Server 2003/Server 2003 x64 and Vista. Please refer to the readme.txt files found in the appropriate directories on the CD containing drivers and documentation. These files contain technical tips or release notes concerning installation and configuration of the device driver. For further information concerning software installation of Xtreme/104-Express products please visit the Connect Tech website at www.connecttech.com.
If you are interested in a device driver for an operating system not listed, please contact the Connect Tech Sales Department. Also, visit the Download Zone of the Support Center on the Connect Tech website for the latest product manuals, installation guides, diagnostic utilities and device driver software.