Connect Tech 104 user manual Specifications, Operating Environment, Communications, Dimensions

Page 26

Connect Tech Xtreme/104-Express User Manual

Specifications

Operating Environment

●	Storage temperature:	-40°C to 105° C
●	Operating temperature:	-40°C to 85° C
●	Relative humidity:	95% non-condensing
●	Air movement:	no requirement

Communications

Baud Rates

●RS-232:up to 1.000 Mbps

●RS-422/485:up to 15.625 Mbps

Custom baud rates are also available. The onboard fractional baud rate divisor will match almost any custom baud rate..

UARTs

●One octal PCI Express UART with up to 128 byte transmit and receive FIFO buffers

Dimensions

Fully PCI/104-Express compliant

●Length: 9.017 cm, 3.550 inches

●Height: 9.5885 cm, 3.775 inches

26	Revision 0.00

Image 26

Contents Xtreme/104-Express Trademark Acknowledgment Limited Lifetime WarrantyCopyright Notice Table of Contents List of Tables Customer Support Overview Contact InformationFeatures IntroductionXtreme/104-Express Board Diagram Xtreme/104-Express Hardware ComponentsElectrical Interfaces Xtreme/104-Express Installation OverviewHardware Configuration Multi-drop Mode Jumper Block SettingsHalf Duplex Mode Line Bias/TerminationExample port configuration jumper block settings Tri-state Operation Connectors/Pinouts O Signal Assignments for Xtreme/104-ExpressRS-422/485 Wiring Diagram DB-9 Male PinoutsHardware Installation Installing the Xtreme/104-Express into your systemSoftware/Driver Installation Windows InstallationGpio Adapter Revision Page Finish Page Uart Serial Port Page Page Port Settings COM Port NumberReceive and Transmit Fifo Settings FIFOsOperating Environment SpecificationsDimensions Communications

Related manuals

Manual 26 pages 4.2 Kb