Introduction, Features | Connect Tech CANpro/104-Plus guide

CANpro/104-Plus Opto User Manual

Introduction

CANpro/104-PlusOpto combines the power of two independent NXP SJA1000 CAN controllers with 3kV optical isolation to provide maximum protection for industrial control applications exposed to harsh conditions. Based on the PCI bus and a PCI-104 form factor, CANpro/104-PlusOpto frees up valuable I/O space for greater flexibility in your embedded system.

Features

●Two independent, industry standard NXP SJA1000 CAN controllers (2.0B compliant)

●PCI-104 2.2 compliant

●16MHz SJA1000 input clock

●32MHz local bus clock

●Fail-safe power-up/power-down using on-board impendence transceivers to maximize nodes on the bus and ensure glitch-free operation.

●Supports up to 1.0 Mbps operation and over 120 nodes on the bus

●3kV optical isolation for each port from the host system

●Output slew rate limiting for lower radiated emissions

●Memory mapped addressing to save valuable I/O space (no jumpers required)

●Decoded address range is configurable for BasicCAN and PeliCAN modes

●Two ten pin right angled headers as standard I/O connectors (DB-9 option available)

●GPIO: 8-bit 3.3V I/O header

●Operating temperature range of -40°C to 85°C

●+5V DC 500mA (max.) power output

RoHS compliant

CTIM-00052 Revision 0.00 4/23/2009	www.connecttech.com	4
	800-426-8979 519-836-1291

CANpro/104-Plus specifications

Connect Tech CANpro/104-Plus is an advanced communication interface designed for high-performance data transfer in embedded systems. This product stands out in the automation, transportation, and industrial control sectors, providing users with a reliable and efficient solution for CAN communication.

One of the primary features of the CANpro/104-Plus is its capability to support multiple CAN channels. This allows for flexible communication options and the ability to interface with various CAN networks simultaneously. The module comes equipped with two isolated CAN channels, which ensures minimized risk of signal interference and enhances data integrity.

The CANpro/104-Plus supports a wide range of CAN protocols, including CAN 2.0A and 2.0B, making it compatible with numerous existing systems. Its support for the more advanced CAN FD (Flexible Data-rate) protocol enables the transmission of larger data packets at higher speeds. This is particularly beneficial for modern applications that demand quick and efficient data communication.

Another significant characteristic of the device is its robust design. The CANpro/104-Plus is built to operate under harsh conditions, with a wide operating temperature range that ensures reliable performance, from -40°C to +85°C. This ruggedness makes it ideal for deployment in challenging environments typical of industrial and automotive applications.

In terms of technology, the CANpro/104-Plus features a high-speed CAN transceiver, which enables fast and reliable communication. Additionally, it includes onboard memory that facilitates buffering of messages, reducing the chances of data loss during high-traffic periods. The interface is also designed for easy integration, featuring support for various development platforms and operating systems such as Linux and Windows.

Connectivity is enhanced through the board’s integration with the PCI-104 form factor. This compact design allows it to fit seamlessly into existing systems without requiring significant changes. It not only saves space but also simplifies the installation process.

Overall, the Connect Tech CANpro/104-Plus delivers a powerful blend of versatility, reliability, and ease of use, making it a preferred choice for engineers and developers seeking to implement effective CAN communication in their systems. Whether it is for industrial automation, vehicle networking, or complex monitoring systems, the CANpro/104-Plus provides the necessary features and resilience to meet the demands of modern applications.