B&B Electronics RS-485 Digital I/O Connections, 485SDA10 I/O Port Pinout, Digital Inputs #0-2

Digital I/O Connections

The digital I/O connections are made on the I/O port, which is a DB-25S (female) connector. Table 2.1 shows the pinout of the I/O port. The next sections explain the functions and connections for the various digital signals.

Table 2.1 - 485SDA10 I/O Port Pinout

*Actual output is equal to power supply input minus 0.7V DC

Digital Inputs #0-2

The digital input lines are CMOS/TTL compatible and can handle voltages from -30V DC to +30V DC. If a digital input is from -30V DC to 1.0V DC, the state will be read as a “0” (LOW). If a digital input is from 2.0V DC to 30V DC, the state will be read as a “1” (HIGH). Connect unused digital inputs to digital ground.

Digital Outputs #0-2

The digital output lines are CMOS/TTL compatible. A digital output that is set to a “0” (LOW) will output a voltage from 0 to 0.6V DC. A digital output that is set to a “1” (HIGH) will output a voltage from 4.3V DC to 5.0V DC. Refer to Chapter 1, Specifications, for more information. Unused digital output lines should be left open.

B&B Electronics -- 707 Dayton Rd. -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 434-7094