Optimus SYSTEM 746 owner manual Timer Operation, Setting the Clock, Setting a WAKE-UP Time

13-1294.fm Page 12 Wednesday, July 14, 1999 7:01 PM

TIMER OPERATION

SETTING THE CLOCK

1.With power turned on, press CLOCK until the hour and minute digits appear.

illustration

2.Press MEMORY. The hour and minute digits flash.

setting the time, start again from Step 1.

•To rapidly increase or de- crease the hour or minute set-

ting, hold down MIN and

HOUR (or TUNING and

on the remote control).

5.Press MEMORY again or wait un- til the display stops flashing.

The system always displays the time while power is turned off. To display the time at any time while power is turned on, press CLOCK.

illustration

SETTING A WAKE-UP TIME

3.Within 10 seconds, press HOUR (or TUNING on the re- mote control) to set the desired hour.

illustration

4.Press MIN (or TUNING on the remote control) to set the de- sired minute.

illustration

Notes:

•If the hour and minute digits stop flashing before you finish

You can set your system to automat- ically turn itself on (like an alarm clock) and play the last selected ra- dio station, a CD, or a cassette tape.

Note: To quickly set the wake-up timer using the last selected system settings (radio station, volume level, and so on; except if the cassette deck is selected), you can leave the power turned off and skip Steps 5–7 and 9.

1.Press CLOCK until TIMER ON and the last set wake-up time appear. Then press MEMORY.

2.Press MIN and HOUR (or TUNING and on the re- mote control) to set the wake-up time.

12