4.Select the desired band and sta- tion, then press 
to release it and start recording. The cassette records until it reaches the end of the side, then the cassette deck automatically stops.
Notes:
•To temporarily stop recording, press 
. Press 
again to re- sume recording.
•If you record broadcasts from AM radio, you might hear a low- volume hum when you play back the recording. If this oc- curs, set BEAT on the back of the system to the other position and try again.
illustration
Beat switch location
5.To stop recording before it auto-
matically stops, press 
on the deck.
24
Recording from a CD
1.Load a blank cassette tape, or one you want to record over.
2.Press 
then 
(Record). 
, 
, and 
lock down.
3.Slide FUNCTION to CD.
4.Load the desired CD in the CD player.
5.Select the desired CD track or program a sequence (if you do not want to record the entire CD in or- der).
Note: To copy a CD’s tracks in random sequence, press RAN- DOM so RANDOM appears.
6.Press both 
on the deck and
PLAY/PAUSE 
y on the CD player.
Notes:
•To briefly stop the tape while re- cording, press 
. To resume re- cording, press 
again.
•To listen to the CD during re- cording, adjust the volume and
7.Recording stops automatically when the tape reaches its end. To stop the tape at any time during
recording, press 
.
Note: To stop the CD at any time during recording, press STOP. The CD’s number of tracks and total play time appear.