PREPARATION
Note: Complete all other connections before connecting the system to AC power and turning it on.
CONNECTING THE
SPEAKERS
1.Lift open the red + and black - tabs for the right (R) and left (L) speaker terminals on the back of the system.
illustration
CONNECTING THE AM LOOP ANTENNA
Attach the supplied AM loop antenna to the AM ANT. terminal on the back of the system.
illustration
Attach the antenna stand and set the antenna on a flat surface.
illustration
2.Put the stripped end of the right speaker’s striped wire into the R red + terminal, then press the tab until it clicks back into place.
3.Put the other right speaker’s wire into the R black - terminal, then press the tab until it clicks back into place.
4.Repeat Steps 2 and 3 to connect the left speaker’s wires to the L + and - terminals.
CONNECTING THE FM ANTENNA
Press the FM ANTENNA terminal tabs, put the stripped end of the supplied FM antenna wires into the antenna terminals on the back of the system, then release the tabs.
illustration
7