B&B Electronics SDAIBB manual Output Voltage Connections

Page 8

OUT

OFF

GND

IN+

IN-

Figure 5: Floating Differential Signal

Output Voltage Connections

The SDAIBB outputs voltages from +0.1 to +5.0 VDC at unity gain, and +0.1 to +4.95 VDC at any other gain. All lines are carried straight through on the DB25 connectors, allowing for the addition of extra channels by connecting on another board.

The SDAIBB output connections are jumper selectable to line up with the channels of the B&B line of SDAxx data acquisition devices. When the 4-position shunt is set to JP9, input buffer A is connected to channel 0 on pin 8, B is connected to channel 1 on pin 9, C is connected to channel 2 on pin 10, and buffer D is connected to channel 3 on pin 11. Setting the 4-position shunt to JP10 connects the buffers to channels 4 to 7 (pins 12, 13, 21, and 22 respectively), and setting the shunt to JP11 connects the buffers to channels 8 to 10 (pins 23 to 25). See Table 1 for a list of the connections when the jumper is on JP9,

Table 2 for when the jumper is on JP10, and Table 3 for when the jumper is on JP11. Note: When the 4-position jumper is on JP11,

buffer D is not connected to any pins on the DB25 connector.

For a listing of which modules the SDAIBB can connect to and which channels are compatible on each module, see Table 4.

6

SDAIBB1300 Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Channel Input Buffer Board Table of Contents Introduction SpecificationsGeneral Information Power Supply ConnectionsEnvironment SizePower Supply Connections ConnectionsSingle Power Supply System with 11 Channels Supported Differential Signal with GND Input Voltage ConnectionsBuffer D is not connected to any pins on the DB25 connector Output Voltage ConnectionsConnections when the 4-position shunt is on JP9 Connections when the 4-position shunt is on JP10Connections when the 4-position shunt is on JP11 Models Compatible with SdaibbGain Selection ConfigurationOutput Offset Values for Use with the Provided Gain Gains and Resistor Values for Standard InputsMaximum Gain Equation 2 Gmax = 24.4V − VCMEquation 3 Gmax = 2Vcm + Equation 4 Gmax = 4.94V InputRangeGain Resistor Determination Equation 9 G =Maximum and Minimum Common Mode Voltage Maximum Differential Vout = in + − in − G + OutputOffsetExample Board Setup Setup for FigureGain Appendix a Glossary − in −Appendix B Error Budget Calculations Error Contributions that can be Removed With CalibrationError Contributions that Cannot be Removed with Calibration Important Specs @ 25CSDAIBB3599Manual Class a Equipment

SDAIBB specifications

B&B Electronics SDAIBB is a standout product in the world of industrial data communication, specifically designed for industrial automation applications. As industries increasingly rely on robust, reliable communication systems, the SDAIBB serves as a vital component in ensuring seamless connections between various devices and networks.

One of the main features of the SDAIBB is its dual mode operation, enabling it to function as both a standard RS-232/RS-422/RS-485 serial device server and a gateway, thereby providing flexibility in communication. This dual capability supports various protocols, facilitating interoperability among a wide range of devices in diverse industrial environments.

The SDAIBB is equipped with multiple serial ports, which allows for simultaneous connections to different devices. This feature is crucial in environments where multiple machines or sensors need to communicate data back to a centralized control system. Additionally, the device supports a variety of baud rates, which enhances compatibility with different serial devices.

One notable technology incorporated into the SDAIBB is its advanced error detection and correction capabilities. This feature ensures data integrity during transmission, which is paramount in industrial settings where data loss or corruption can lead to significant operational disruptions. The device’s built-in surge protection and isolation circuits further enhance its reliability in harsh environments.

The SDAIBB also supports various networking protocols, including Modbus and TCP/IP, which simplifies integration into existing systems. The device is compatible with both Ethernet and Wi-Fi, providing versatile connectivity options for diverse industrial layouts. This connectivity aids in remote monitoring and control, offering companies improved efficiency and reduced downtime.

In terms of installation and configuration, the SDAIBB is user-friendly. It comes with a web-based management interface that allows users to configure settings and monitor performance easily. This accessibility ensures that technicians can quickly set up the device without extensive training, thus reducing deployment time.

Furthermore, the SDAIBB is robustly built to withstand harsh industrial conditions. Its compact and rugged design allows it to be installed in a variety of environments, from manufacturing floors to remote field locations.

In summary, the B&B Electronics SDAIBB is a versatile and reliable solution for industrial communication needs. Its dual mode functionality, multiple serial port support, advanced error detection, and compatibility with various protocols make it an essential tool for enhancing connectivity and data integrity in industrial applications. This device is a testament to the growing importance of effective communication technology in optimizing operational efficiency and productivity in the industry.
Top Page Image Contents