B&B Electronics 232PCC2 manual Baddress

Page 12

Command Line Options

To configure a 232PCC2 in the system, the Enabler requires one command line argument from the user to determine the configuration of the card. This argument must be enclosed in parenthesis and within the argument, any or all of the following parameters may be specified using a comma (no spaces) to separate each parameter:

Ssocket specifies which PCMCIA socket the 232PCC2 must be inserted into for this configuration argument to be used. socket must be in the range 0 - 15. This option is always required.

Baddress

specifies a block mode base I/O adddress of the

 

232PCC2 in hexadecimal and must reside on an even

 

16-byte (10H) boundary. Specify only one of the

 

following three options: Baddress, Dmode, or ‘R’. Use

 

of one of these options is always required.

Dmode

specifies a COM mode base I/O address configuration

 

for the 232PCC2. The ‘D1’ option configures the

 

232PCC2 at COM1/COM3 (3F8/3E8), and the ‘D2’

 

option configures the 232PCC2 at COM2/COM4

 

(2F8/2E8). Specify only one of the following three

 

options: Baddress, Dmode, ‘R’. Use of one of these

 

options is always required.

Iirq

specifies the interrupt level (IRQ) of the 232PCC2 in

 

decimal. irq must be one of the following values: 3, 4,

 

5, 7, 9, 10, 11, 12, 14, 15, or 0 if no IRQ is desired.

 

This option is required if the 'R' option is not used.

Waddress

specifies the base address of the memory window

 

required to configure the 232PCC2. Set address = D0

 

for a memory window at segment D000, address = D8

 

for a memory window at segment D800, etc. Valid

 

settings for address are C8, CC, D0, D4, D8, and DC.

 

If this option is omitted, a memory window at segment

 

D000 will be used.

Uinstructs the Enabler to disable the 232PCC2's interrupt status register and enable the Scratchpad registers of the individual UARTs. This option is only required in very rare cases where an application program requires access to the UART's Scratchpad register. If this option is omitted, the 232PCC2's interrupt status register is enabled and the UARTs'

Documentation Number 232PCC23799 Manual

11

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353-91-792444 – Fax +353-91-792445

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Pcmcia RS-232 2-Port Card Table of Contents Specifications IntroductionDOS / Windows 3.x Installation Client Driver recommended EnablerClient Driver vs. Enabler for DOS/Windows Client Driver Installation 232PCC2 Client Driver for DOSCommand Line Options Iirq ExampleExample Example Common Problems 232PCC2 Enabler for DOS Baddress DSP100EN.EXE Memory Range Exclusion Card and Socket Services Software Socket NumbersWindows 95/98 Installation Installing a 232PCC2 Under Windows 95/98232PCC2 Resource Settings in Windows 95/98 Viewing the 232PCC2 Resource Settings Dual RS-232 Serial Port CardChanging Resource Settings with Device Manager Basic Configuration Port Addresses 232PCC2 Basic Configuration TableDocumentation Number 232PCC23799 Manual Hardware Information 232PCC2 RS-232 Address AssignmentExternal Connections Rt a Rt BAppendix a Declaration of Conformity Declaration of Conformity

232PCC2 specifications

B&B Electronics, a leader in industrial communication technology, offers a wide range of products, including the 232PCC2 – an exceptional solution for serial communication needs. This versatile device is designed to provide reliable and efficient data transmission between devices, making it an essential component in various applications such as automation, control systems, and data acquisition.

The 232PCC2 is a serial to USB adapter that ensures seamless connectivity between RS-232 devices and modern computers that may lack serial ports. One of its standout features is the ability to support full-duplex communication, allowing simultaneous transmission and reception of data. This capability is vital for applications where real-time data transfer is crucial.

Equipped with a robust and compact design, the 232PCC2 is built for durability, making it suitable for harsh industrial environments. Its rugged construction ensures that it can withstand vibrations, shocks, and temperature fluctuations. Additionally, the device features ESD protection, safeguarding connected equipment from electrical surges and static discharge.

Another noteworthy characteristic of the 232PCC2 is its ease of installation. With plug-and-play functionality, users can swiftly connect their RS-232 devices to a USB port without the need for extensive configuration. It’s compatible with various operating systems, including Windows, Linux, and Mac, providing flexibility for diverse user preferences.

The device boasts data rates of up to 115.2 Kbps, enabling high-speed communication that meets the demands of modern industrial applications. The built-in LED indicators offer real-time status monitoring by displaying power and data transmission activity, facilitating quick troubleshooting and maintenance.

Furthermore, the 232PCC2 incorporates advanced technologies such as dynamic power management, which optimizes power consumption and prolongs the lifespan of the device. This energy-efficient design is increasingly important in today’s environmentally conscious world.

Overall, B&B Electronics 232PCC2 stands out as a reliable and user-friendly serial communication solution. Its blend of durability, high performance, and ease of use makes it an ideal choice for professionals seeking efficient data connectivity for their industrial applications. Whether used in a factory setting or within a laboratory environment, the 232PCC2 enhances productivity and ensures dependable communication across various systems.
Top Page Image Contents