B&B Electronics manual 232PCC2 Client Driver for DOS, Client Driver Installation

Page 5

232PCC2 Client Driver for DOS

In order to use the 232PCC2 Client Driver, the system must be configured with Card and Socket Services software.

IMPORTANT:

Some versions of Card and Socket Services dated before 1993 do not support general purpose I/O cards. If after careful installation of the Client Driver the 232PCC2 does not configure or operate properly, an updated version of Card and Socket Services may be required.

Client Driver Installation

The following procedure is used to install the 232PCC2 Client Driver:

•Copy the file DSP100CL.SYS from the 232PCC2 distribution diskette onto the system's hard drive.

•Using an ASCII text editor, open the system's CONFIG.SYS file located in the root directory of the boot drive.

•Locate the line(s) in the CONFIG.SYS file where the Card and Socket Services software is installed.

•AFTER the line(s) installing the Card and Socket Services software, add the following line to the CONFIG.SYS file:

DEVICE = drive:\path\DSP100CL.SYS options

where options are the 232PCC2 Client Driver command line options discussed on the following pages.

•Save the CONFIG.SYS file and exit the text editor.

•Insert the 232PCC2 into one of the system's PCMCIA slots.

NOTE: Since the 232PCC2 Client Driver supports "Hot Swapping", it is not necessary to have the 232PCC2 installed when booting the system. By inserting the card before booting, however, the Client Driver will report the adapter configuration during the boot process thereby verifying the changes made to the CONFIG.SYS.

4

Documentation Number 232PCC23799 Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353-91-792444 – Fax +353-91-792445

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Pcmcia RS-232 2-Port Card Table of Contents Introduction SpecificationsClient Driver vs. Enabler for DOS/Windows DOS / Windows 3.x InstallationClient Driver recommended Enabler 232PCC2 Client Driver for DOS Client Driver InstallationCommand Line Options Example IirqExample Example Common Problems 232PCC2 Enabler for DOS Baddress DSP100EN.EXE Memory Range Exclusion Socket Numbers Card and Socket Services SoftwareInstalling a 232PCC2 Under Windows 95/98 Windows 95/98 Installation232PCC2 Resource Settings in Windows 95/98 Dual RS-232 Serial Port Card Viewing the 232PCC2 Resource SettingsChanging Resource Settings with Device Manager 232PCC2 Basic Configuration Table Basic Configuration Port AddressesDocumentation Number 232PCC23799 Manual 232PCC2 RS-232 Address Assignment Hardware InformationRt a Rt B External ConnectionsDeclaration of Conformity Appendix a Declaration of Conformity

232PCC2 specifications

B&B Electronics, a leader in industrial communication technology, offers a wide range of products, including the 232PCC2 – an exceptional solution for serial communication needs. This versatile device is designed to provide reliable and efficient data transmission between devices, making it an essential component in various applications such as automation, control systems, and data acquisition.

The 232PCC2 is a serial to USB adapter that ensures seamless connectivity between RS-232 devices and modern computers that may lack serial ports. One of its standout features is the ability to support full-duplex communication, allowing simultaneous transmission and reception of data. This capability is vital for applications where real-time data transfer is crucial.

Equipped with a robust and compact design, the 232PCC2 is built for durability, making it suitable for harsh industrial environments. Its rugged construction ensures that it can withstand vibrations, shocks, and temperature fluctuations. Additionally, the device features ESD protection, safeguarding connected equipment from electrical surges and static discharge.

Another noteworthy characteristic of the 232PCC2 is its ease of installation. With plug-and-play functionality, users can swiftly connect their RS-232 devices to a USB port without the need for extensive configuration. It’s compatible with various operating systems, including Windows, Linux, and Mac, providing flexibility for diverse user preferences.

The device boasts data rates of up to 115.2 Kbps, enabling high-speed communication that meets the demands of modern industrial applications. The built-in LED indicators offer real-time status monitoring by displaying power and data transmission activity, facilitating quick troubleshooting and maintenance.

Furthermore, the 232PCC2 incorporates advanced technologies such as dynamic power management, which optimizes power consumption and prolongs the lifespan of the device. This energy-efficient design is increasingly important in today’s environmentally conscious world.

Overall, B&B Electronics 232PCC2 stands out as a reliable and user-friendly serial communication solution. Its blend of durability, high performance, and ease of use makes it an ideal choice for professionals seeking efficient data connectivity for their industrial applications. Whether used in a factory setting or within a laboratory environment, the 232PCC2 enhances productivity and ensures dependable communication across various systems.
Top Page Image Contents