![](/images/new-backgrounds/1263229/26322919x1.webp)
Chapter 2: Setup
Inspection
Your 3PCIO1 serial card was tested for proper operation before packaging. It should be in perfect mechanical and electrical condition upon receipt.
CAUTION: ELECTROSTATIC SENSITIVE DEVICE
Use ESD precautions for safe handling.
Before removing the card from the
•Discharge any static electricity buildup on your body by touching a large grounded metal surface or the metal chassis on equipment connected to earth ground by a
•Avoid touching the gold connectors or other parts on the card except as necessary to set the configuration jumpers.
•Remove AC power from the computer before inserting the card.
•Retain the ESD bag for handling the card. Save the packaging for storage or shipping.
Before Starting…
The card is normally
Check/Set 3 Operating Mode Jumpers for Mode desired.
Device Driver Setting for RS-485 Mode:
After driver installation, set DTR Operation to
See Chapter 4, Setting Driver Options.
Continued next page
Documentation Number | Chapter 2 | 5 |
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph